Interface Modules (469 items)

Model Number = ADAM-4055-C Number of Contacts = 16 Connector Type = Terminal Block Mounting Type = DIN Rail Mount Series = ADAM-4055

Booster for RS232 signal can extend cable length. Works with a wide voltage swing and outputs -11V to +11V signal making it suitable for legacy and non-conforming RS232 equipment. Provides isolatio...

USB Interface Modules. A range of USB type socket to 45° screw terminal interface modules. The terminals are marked with +5V, D-, D+ and GND. These modules have seperate shield connection and are m...

Diode Module and Component Modules. A low profile diode module that will protect against return voltage to circuits and a component carrier without diodes.

Diode Module and Component Modules. A low profile diode module that will protect against return voltage to circuits and a component carrier without diodes.

RJ45 Interface Module. The CIM/RJ45 is a female single RJ45 (8P8C) type socket to screw terminals interface module. The terminals are marked 1 to 8 (+ shield) with a separate shield connection. Fea...

Gender = Socket Model Number = RJ45 Number of Contacts = 2 Connector Type = RJ45 Mounting Type = DIN Rail Current Rating = 500mA Series = CIM

Gender = Socket Wire Size = 30 → 12 AWG Number of Contacts = 8 Connector Type = RJ45 Mounting Type = DIN Rail Current Rating = 100mA Series = CIM

Finder Interface Relay ModuleThe Finder interface relay module is an electromechanical board equipped with 40 numbers of the relay which operates on 24VDC voltage supply. It has a mount base that c...

Series 40 relay interface modules. 8 and 16 relay interface modules mounted on support Equipped with a base that clips onto a DIN rail. LED display of relay status. Spring terminal connection. Opti...

Interface module 8, 16 or 32 relays. Interface modules with 8,16 or 32 narrow, pull-out relays. Operation indication by green led. Locking lever base. Universal support unit for TS35 DIN rail.

Half Pitch Interface Connectors The FI series is a connector developed as a half pitch I / F of the FANUC CNC equipment system 18, 16 series. For the connection method, 20 poles of pressure welding...

Half Pitch Interface Connectors The FI series is a connector developed as a half pitch I / F of the FANUC CNC equipment system 18, 16 series. For the connection method, 20 poles of pressure welding...

1.27mm Pitch Multi-function Two Piece ConnectorsVarious connection with various product line Easy One-Touch Operation Board to board type - Prevents flux penetration, Stack height 12mm to 16mm, Mis...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

Model Number = 01118-2 Mounting Type = DIN Rail Series = SE410S

Mounting on rail Fitted with Lexic label holder Can be joined together Possibility of forming a four pole distribution block by adding modules Rating : 160 A Isc peak : 27 kA Number of modules : 2

Wire Size = 0.6 - 0.8 mm Number of Contacts = 2 Mounting Type = DIN Rail Mount

KNX TP Media Coupler; Universal Plug and Play; No additional external power supply required

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

Gender = Female Model Number = NXR-ILM08C-EIT Number of Contacts = 4 Connector Type = M12 Mounting Type = Screw Current Rating = 9A Series = NXR

Gender = Female Model Number = NXR Number of Contacts = M12 Connector Type = M12 Mounting Type = Screw Current Rating = 40mA Series = NXR

The VARIOFACE feed-through module implements a 1:1 connection between screw connection terminal blocks and a D-SUB miniature pin strip (number of positions: 37). A separate ground tap is available.

16-channel relay module for Honeywell C300 input modules. The module is controlled by the control system via 37-pos. D-SUB or 50-pos. FLK. A screw connection with knife disconnection is available i...

16-channel relay module (1 changeover contact) for Honeywell C300 output modules. On the control side, the module is controlled via D-SUB 37-pos. or FLK 50-pos. A screw connection with knife discon...

32-channel relay module with a screw connection and redundant voltage supply. Suitable for Yokogawa ADV551 and ADV561 cards.

16-channel relay module for Honeywell C300 output modules. The module is controlled by the control system via 37-pos. D-SUB or 50-pos. FLK. A screw connection with knife disconnection is available ...

16-channel relay module for Honeywell C300 output modules TDOB01 and TBOB11. On the controller side, the module is controlled on a 37-pos. basis via D-SUB. A screw connection is available (marking:...

32-channel relay module for Yokogawa ADV 551 and ADV 561 digital output modules. Redundant system connection, spring-cage connection on the field side. Pluggable relays with status indicator (LED) ...

1:1 interface module for Yokogawa AAV 141, AAV 142, AAT 141, AAI 141, AAI 143 analog I/O modules, AAV 542, AAI 543, AAI 841, AAB 841, AAI 135, AAP 135, AAI 835 and AAR 181. Redundant system connect...

VARIOFACE interface module with screw connection, for Yokogawa RTD module AAR145.

VARIOFACE interface module with fuse and fuse failure display

32-channel input relay module (1 N/O contact) with screw connection and fuse (1 A). I/O connection, the voltage supply and the 50-pos. strip are designed redundantly. Suitable for Yokogawa ADV151 a...

VARIOFACE output extension module, with plug-in bases for 16 miniature relays, 1 PDT each, for 24 V DC (without relays)

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature pin strip (number of positions: 15). A separate gr...

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature socket strip (number of positions: 15). A separate...

Interface module with 1:1 connection (suitable for Delta V control system)

VIP-2/SC/D 9SUB/M/LED 2322142VARIOFACE interface module with 9 position screw connection to D-Subminiature 9 pin strip. For mounting on 35mm DIN rails, with LED status indicator.Features and Benefi...

VARIOFACE module with push-in connection and RJ45 connector

VARIOFACE module, with push-in connection and D-SUB miniature socket strip, for mounting on NS 35 rails, 9-pos.

VARIOFACE module, with push-in connections and flat-ribbon cable connector, for mounting on NS 35 rails, with pin strip and short and long locking latches for socket strips, 10-pos.

VARIOFACE module, for 8 channels, each with an additional terminal block and fuse per signal, (common minus potential)

VARIOFACE module, with push-in connection and D-SUB miniature pin strip, for mounting on NS 35 rails, with LED, 9-pos.

VARIOFACE interface module for 8 channels

16-channel module for Honeywell C300 analog output cards with disconnect, test points, socketed 500 mA fuses and fuse status indicator.

16-channel module for Honeywell C300 analog output cards with disconnect, test points, socketed 500 mA fuses and fuse status indicator.

16-channel module for Honeywell C300 digital cards with disconnect, test points, socketed 1A fuses and fuse status indicator.

VARIOFACE module, with push-in connections and flat-ribbon cable connector, for mounting on NS 35 rails, with pin strip and short and long locking latches for socket strips, 14-pos.

VARIOFACE interface module, with push-in connection and light indicator, for 8 channels

VARIOFACE interface module, with push-in connection for 8 channels

VARIOFACE COMPACT LINE, output module with 8 miniature relays, 1 N/O contact each, plugged, for 24 V DC (incl. relay)

VARIOFACE module, with push-in connection and high density D-SUB miniature socket strip, for mounting on NS 35, no. of pos.: 15

VARIOFACE module, with push-in connections and flat-ribbon cable connector, for mounting on NS 35 rails, with pin strip and short and long locking latches for socket strips, 16-pos.

VARIOFACE module, with push-in connections and high density D-SUB miniature pin-strip, for mounting on NS 35 rails, no. of pos.: 15

VARIOFACE interface module, for 8 channels, each with an additional terminal block per signal for a common plus potential

VARIOFACE module, with push-in connections and male D-SUB miniature pin strip, for mounting on NS 35 rails, 15-pos.

VARIOFACE interface module, for 8 channels, each with an additional terminal block per signal for a common minus potential

VARIOFACE module, with push-in connection and D-SUB miniature socket strip, for mounting on NS 35 rails, 15-pos.

VARIOFACE output module, with 8 miniature relays, 1 N/O contact each, plugged, for 24 V DC (incl. relay)

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature pin strip (number of positions: 25). A separate gr...

VARIOFACE module, with push-in connection and D-SUB miniature pin strip, for mounting on NS 35 rails, with LED, 15-pos.

VARIOFACE module, with screw connection and D-Subminiature socket strip, for mounting on NS 35 rails, with LED, 15-pos.

VARIOFACE module, with psh-in connection and D-subminiature socket strip, for mounting on NS 35 rails, with LED, 15-pos.

Interface module with 1:1 connection and separate equipotential terminals (suitable for analog output cards of the Delta V control system)

VARIOFACE interface module, for 8 channels with knife disconnect terminal blocks and test sockets to the peripherals and the system

VARIOFACE module, with push-in connections and flat-ribbon cable connector, for mounting on NS 35 rails, with pin strip and short and long locking latches for socket strips, 20-pos.

VARIOFACE sensor module, for connecting 8 pnp sensors, with LEDCan be used for digital I/O modulesWith LED as an optionByte-by-byte labelingPositive and negative connection per signal

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature pin strip (number of positions: 50). There is no s...

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature pin strip (number of positions: 37). A separate gr...

VARIOFACE sensor module, for connecting 8 pnp sensors, with LED

VARIOFACE module, with push-in connection and high density D-SUB miniature pin strip, for mounting on NS 35 rails, no. of pos.: 26

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature socket strip (number of positions: 37). A separate...

VARIOFACE sensor module, with push-in connection, for connecting 8 pnp sensors

VARIOFACE module, with push-in connections and high density D-SUB miniature socket-strip, for mounting on NS 35 rails, no. of pos.: 26

VARIOFACE module, with screw connection and D-Subminiature pin strip, for mounting on NS 35 rails, with LED, 25-pos.

VARIOFACE module, with screw connection and D-Subminiature socket strip, for mounting on NS 35 rails, with LED, 25-pos.Metal footScrew connection1:1 connection

VIP-3/PT/FLK26 2903791VARIOFACE interface module, with 26 position push-in connections and flat-ribbon cable connector. For mounting on 35mm DIN rails, with short and long locking latches for socke...

VARIOFACE module, with push-in connections and male D-SUB miniature pin strip, for mounting on NS 35 rails, 25-pos.

VARIOFACE COMPACT LINE interface module for Allen-Bradley® ControlLogix® systems with ControlLogix-specific labeling number of positions: 2 x 14 module width: 80.6 mm

VARIOFACE SLIM LINE, with screw connection and D-subminiature socket strip, for assembly at a right angle on NS 35/7.5, 25 positions

Universal interface module with 1:1 connection between the 40-pos. system connection and the spring-cage connection.

VARIOFACE module, with push-in connections and D-SUB miniature pin strip, for mounting on NS 35 rails, with LED, 25-pos.

VARIOFACE module, with push-in connections and D-SUB miniature socket strip, for mounting on NS 35 rails, with LED, 25-pos.

16-channel analog input/output module with spring-cage connection. Suitable for Yokogawa AAI141, AAI143 and AAI543 cards.Every channel can be switched between the output and the input. Connection o...