Interface Modules (381 items)

Booster for RS232 signal can extend cable length. Works with a wide voltage swing and outputs -11V to +11V signal making it suitable for legacy and non-conforming RS232 equipment. Provides isolatio...

USB Interface Modules. A range of USB type socket to 45° screw terminal interface modules. The terminals are marked with +5V, D-, D+ and GND. These modules have seperate shield connection and are m...

Diode Module and Component Modules. A low profile diode module that will protect against return voltage to circuits and a component carrier without diodes.

Diode Module and Component Modules. A low profile diode module that will protect against return voltage to circuits and a component carrier without diodes.

RJ45 Interface Module. The CIM/RJ45 is a female single RJ45 (8P8C) type socket to screw terminals interface module. The terminals are marked 1 to 8 (+ shield) with a separate shield connection. Fea...

Gender = Socket Model Number = RJ45 Number of Contacts = 2 Connector Type = RJ45 Mounting Type = DIN Rail Current Rating = 500mA Series = CIM

Gender = Socket Wire Size = 30 → 12 AWG Number of Contacts = 8 Connector Type = RJ45 Mounting Type = DIN Rail Current Rating = 100mA Series = CIM

Finder Interface Relay ModuleThe Finder interface relay module is an electromechanical board equipped with 40 numbers of the relay which operates on 24VDC voltage supply. It has a mount base that c...

Series 40 relay interface modules. 8 and 16 relay interface modules mounted on support Equipped with a base that clips onto a DIN rail. LED display of relay status. Spring terminal connection. Opti...

Interface module 8, 16 or 32 relays. Interface modules with 8,16 or 32 narrow, pull-out relays. Operation indication by green led. Locking lever base. Universal support unit for TS35 DIN rail.

Model Number = ADAM-4055-C Number of Contacts = 16 Connector Type = Terminal Block Mounting Type = DIN Rail Mount Series = ADAM-4055

Model Number = ADAM-4069-B Number of Contacts = 8 Connector Type = Plug In Terminal Mounting Type = DIN Rail Mount Series = ADAM-4069

0.6mm Pitch Stacking Height 5mm to 16mm ConnectorsWide variations: PCB distance (5 mm to 16 mm) x No. of pos. (40 to 280) 3.125 Gbps high speed transmission support Highly reliable contact with opt...

Gender = Female Number of Contacts = 100 Body Orientation = Straight Mounting Type = Surface Mount Test Proof Voltage = 300 (1 min)V ac Voltage Rating = 100 V ac, 300 V Current Rating = 400mA Dimen...

Gender = Female Number of Contacts = 15 Body Orientation = Straight Test Proof Voltage = 500 (1 min)V ac Voltage Rating = 250 V ac Current Rating = 1A Dimensions = 19.2 x 19.8 x 9.2mm Depth = 9.2mm...

Half Pitch Interface Connectors The FI series is a connector developed as a half pitch I / F of the FANUC CNC equipment system 18, 16 series. For the connection method, 20 poles of pressure welding...

Half Pitch Interface Connectors The FI series is a connector developed as a half pitch I / F of the FANUC CNC equipment system 18, 16 series. For the connection method, 20 poles of pressure welding...

Gender = Female Number of Contacts = 20 Body Orientation = Straight Mounting Type = PCB Mount Voltage Rating = 250 V ac, 500 V Current Rating = 500mA Dimensions = 33.35 x 9 x 10.9mm Depth = 10.9mm ...

1.27mm pitch High Density I/O connector27mm (0.050″) contact spacing conserves valuable board space and permits ultra-high density designs. Bellows contacts create smooth and precise mating and unm...

1.27mm pitch High Density I/O connector27mm (0.050″) contact spacing conserves valuable board space and permits ultra-high density designs. Bellows contacts create smooth and precise mating and unm...

Gender = Male Wire Size = 28 AWG Number of Contacts = 20 Body Orientation = Straight Voltage Rating = 250 V ac, 500 V Current Rating = 500mA Dimensions = 20.9 x 12.6 x 9.1mm Depth = 9.1mm Length = ...

Gender = Female Wire Size = 28 AWG Number of Contacts = 32 Body Orientation = Straight Voltage Rating = 125 V ac, 300 V Current Rating = 500mA Dimensions = 35.45 x 7 x 19.1mm Depth = 19.1mm Length ...

1.27mm Pitch Multi-function Two Piece ConnectorsVarious connection with various product line Easy One-Touch Operation Board to board type - Prevents flux penetration, Stack height 12mm to 16mm, Mis...

Gender = Female Wire Size = 28 AWG Number of Contacts = 40 Body Orientation = Straight Voltage Rating = 125 V ac, 300 V Current Rating = 500mA Dimensions = 40.53 x 7 x 19.1mm Depth = 19.1mm Length ...

1.27mm Pitch Multi-function Two Piece ConnectorsVarious connection with various product line Easy One-Touch Operation Board to board type - Prevents flux penetration, Stack height 12mm to 16mm, Mis...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connectio...

Mounting on rail Fitted with Lexic label holder Can be joined together Possibility of forming a four pole distribution block by adding modules Rating : 160 A Isc peak : 27 kA Number of modules : 2

Wire Size = 0.6 - 0.8 mm Number of Contacts = 2 Mounting Type = DIN Rail Mount

KNX TP Media Coupler; Universal Plug and Play; No additional external power supply required

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

The MOXA Wiring Terminal Series comes with easy to wire screw terminals designed for signal wiring in industrial applications. These products are easily connected with data signals, such as MOXA Mu...

Gender = Female Model Number = NXR-ILM08C-EIT Number of Contacts = 4 Connector Type = M12 Mounting Type = Screw Current Rating = 9A Series = NXR

Gender = Female Model Number = NXR Number of Contacts = M12 Connector Type = M12 Mounting Type = Screw Current Rating = 40mA Series = NXR

32-channel relay module with a screw connection and redundant voltage supply. Suitable for Yokogawa ADV551 and ADV561 cards.

1:1 interface module for Yokogawa AAV 141, AAV 142, AAT 141, AAI 141, AAI 143 analog I/O modules, AAV 542, AAI 543, AAI 841, AAB 841, AAI 135, AAP 135, AAI 835 and AAR 181. Redundant system connect...

VIP-2/SC/D 9SUB/M/LED 2322142VARIOFACE interface module with 9 position screw connection to D-Subminiature 9 pin strip. For mounting on 35mm DIN rails, with LED status indicator.Features and Benefi...

VARIOFACE interface module, for 8 channels, each with an additional terminal block per signal for a common plus potential

VARIOFACE module, with push-in connections and male D-SUB miniature pin strip, for mounting on NS 35 rails, 15-pos.

VARIOFACE module, with push-in connection and D-SUB miniature pin strip, for mounting on NS 35 rails, with LED, 15-pos.

VARIOFACE sensor module, for connecting 8 pnp sensors, with LEDCan be used for digital I/O modulesWith LED as an optionByte-by-byte labelingPositive and negative connection per signal

VARIOFACE module, with push-in connection and high density D-SUB miniature pin strip, for mounting on NS 35 rails, no. of pos.: 26

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature socket strip (number of positions: 37). A separate...

VARIOFACE module, with screw connection and D-Subminiature socket strip, for mounting on NS 35 rails, with LED, 25-pos.Metal footScrew connection1:1 connection

VIP-3/PT/FLK26 2903791VARIOFACE interface module, with 26 position push-in connections and flat-ribbon cable connector. For mounting on 35mm DIN rails, with short and long locking latches for socke...

VARIOFACE COMPACT LINE interface module for Allen-Bradley® ControlLogix® systems with ControlLogix-specific labeling number of positions: 2 x 14 module width: 80.6 mm

VARIOFACE module, with push-in connections and D-SUB miniature socket strip, for mounting on NS 35 rails, with LED, 25-pos.

VARIOFACE module, with push-in connections and D-SUB pin strip, for mounting on NS 35 rails, with LED, 37-pos.

16-channel analog module with a screw connection and two 40-pos. system connections. Suitable for the Yokogawa AA1543 card.For AAI 543 analog module

VARIOFACE interface module for 32 channelsCan be used for digital I/O modulesWith LED as an optionByte-by-byte labeling

VARIOFACE module, with push-in connection and plug D-SUB miniature pin strip, for mounting on NS 35 rails, 37-pos.These VARIOFACE modules are used in combination with the relevant front adapters

VARIOFACE interface module for Yokogawa I/O AAI135 and AAI835 modules.

VARIOFACE module, with push-in connections and D-SUB miniature pin strip, for mounting on NS 35 rails, with LED, 50-pos.

VARIOFACE SLIM LINE, with screw connection and D-subminiature pin strip, for assembly at a right angle on NS 35/7.5, 37 positions

VARIOFACE module, with push-in connections and D-SUB 50 socket connector, for mounting on NS 35 rails

Interface module, connection 1: Screw connection, connection 2: ELCO connector 1x 56-position (Pin strip, Type 8016, right)

VARIOFACE module, with push-in connections and high density D-SUB miniature pin strip , for mounting on NS 35 rails, no. of pos.: 62

16-channel digital input module with screw connection and redundant voltage supply. Suitable for Yokogawa SDV 144 card.

1:1 interface module for Yokogawa AAV 141, AAV 142, AAT 141, AAI 141, AAI 143 analog I/O modules, AAV 542, AAI 543, AAI 841, AAB 841, AAI 135, AAP 135, AAI 835 and AAR 181. Redundant system connect...

32-channel module with 1-conductor screw connection and a fuse in each signal path (5 x 20 mm). The voltage supply and the 50-pos. system connection are designed redundantly. Suitable for the Yokog...

16-channel module for Honeywell C300 modules. On the control side, the module is controlled via D-SUB 37-pos. or FLK 50-pos. A screw connection (1+, 1C, 1-,..16+, 16C, 16-) with knife disconnection...

16-channel digital output module with screw connection and integrated knife disconnect function. Redundant voltage supply. Suitable for Yokogawa card SDV 541.

Wire Size = 16 → 24 AWG Number of Contacts = 14 Connector Type = FLK

Wire Size = 16 → 24 AWG Number of Contacts = 14 Connector Type = FLK

HE10. Screw terminal interface modules with connectors suitable for interfacing electrical cabling to I/O cards and electronic equipment. Designed to mount on standard BS 5584:1978 ‘DIN ‘ rail. Fit...

Gender = Female Wire Size = 16 → 24 AWG Number of Contacts = 15 Connector Type = D-sub

Phoenix Contact VARIOFACE D-sub interface module. The VARIOFACE D-sub interface modules from Phoenix Contact are DIN rail mounted, plug-in D-sub modules that are designed to be slotted onto an NS35...

Varioface Compact-Line Modules for D-Sub connectors. The range of Varioface Compact-Line modules for D-Sub connectors from Phoenix Contact have the same properties as standard Varioface modules but...

Wiring Module UM 45-D with Tension Spring Connection. Varioface compact line modules connect D-Sub socket boards or socket connectors with tension spring connection terminals For mounting on NS 35 ...

Wire Size = 16 → 24 AWG Number of Contacts = 15 Connector Type = D-sub

Phoenix Contact D-sub interface module VIP VARIOFACE. The VIP VARIOFACE D-sub interface modules from Phoenix Contact are dIN rail mounted, plug-in D-sub modules that are designed to be slotted onto...

Varioface Compact-Line Modules for D-Sub connectors. The range of Varioface Compact-Line modules for D-Sub connectors from Phoenix Contact have the same properties as standard Varioface modules but...

Wiring Module UM 45-D with Tension Spring Connection. Varioface compact line modules connect D-Sub socket boards or socket connectors with tension spring connection terminals For mounting on NS 35 ...

Phoenix Contact VARIOFACE D-sub interface module. The VARIOFACE D-sub interface modules from Phoenix Contact are DIN rail mounted, plug-in D-sub modules that are designed to be slotted onto an NS35...

Wire Size = 16 → 24 AWG Number of Contacts = 16 Connector Type = FLK

Phoenix Contact D-sub interface module VIP VARIOFACE. The VIP VARIOFACE D-sub interface modules from Phoenix Contact are dIN rail mounted, plug-in D-sub modules that are designed to be slotted onto...

HE10. Screw terminal interface modules with connectors suitable for interfacing electrical cabling to I/O cards and electronic equipment. Designed to mount on standard BS 5584:1978 ‘DIN ‘ rail. Fit...

Gender = Male Wire Size = 12 → 24 AWG Number of Contacts = 16 Connector Type = FLK, IDC

VARIOCON-Interface, with EMC shielding adapter, 32-pos. connector on 2 x 32-pos. screw connection

Wire Size = 16 → 24 AWG Number of Contacts = 20 Connector Type = FLK

Wire Size = 16 → 24 AWG Number of Contacts = 20 Connector Type = FLK

HE10. Screw terminal interface modules with connectors suitable for interfacing electrical cabling to I/O cards and electronic equipment. Designed to mount on standard BS 5584:1978 ‘DIN ‘ rail. Fit...

The VARIOFACE feed-through module implements a 1:1 connection between screw connection terminal blocks and an IDC/FLK pin strip (2.54 mm, number of positions: 40).

The VARIOFACE feed-through module implements a 1:1 connection between screw connection terminal blocks and a D-SUB miniature pin strip (number of positions: 37). A separate ground tap is available.

VARIOFACE module, with screw connection and D-Subminiature pin strip, for mounting on NS 35/7.5 or NS 32, 15-pos.

VARIOFACE interface module, for 8 channels with knife disconnect terminal blocks and test sockets to the peripherals and the system

VARIOFACE interface module, for 32 channels, each with an additional terminal block per signal for a common plus potential

VARIOFACE interface module for Siemens SIMATIC S7-400, with labeling (1-50), knife disconnect terminal block and test connection, module width: 259 mm

VARIOFACE module, with spring-cage connection and flat-ribbon cable connector, for mounting on NS 35/7.5, 20-pos.