JST Board to Board and Wire to Board LEB Connectors. The JST LEB Connector 4.0 mm pitch Board to Board or Wire to Board System is low profile with a PCB height of only 2.7 mm suitable for LED light...
JST 1.8 mm Wire to Board LEA Connector. The JST LEA Connector 1.8 mm pitch System provides is low profile with a PCB height of only 3 mm suitable for LED lighting. The LEA Connector System has a se...
HDMI Plug Connector Cover. From Wurth Elektronik, this connector cover is for plugging into HDMI sockets to protect them when they are un-mated. It is constructed from Polyethylene (PE).
HDMI Socket Connector Cover. From Wurth Elektronik, this connector cover is for HDMI plugs to protect them when they are un-mated. It is constructed from translucent Polyethylene (PE).
Dummy Plug for XLR Chassis. From Neutrik, this dummy plug is useful in preventing mis-wiring and protecting against dust ingress for XLR chassis connectors.
Dummy Plug for XLR Chassis. From Neutrik, this dummy plug is useful in preventing mis-wiring and protecting against dust ingress for XLR chassis connectors.
Dummy Plug for Powercon and speakON. From Neutrik, this dummy plug is useful in preventing mis-wiring and protecting against dust ingress for 4 pole Powercon and speakON chassis connectors.
Dummy Plug for OpticalCON Chassis. From Neutrik, this dummy plug is useful in preventing mis-wiring and protecting against dust ingress for OpticalCON chassis connectors.
S1K Jack Connector Seal. From RS Pro, this front sealing cap is for use with S1K sealed Jack Sockets. It fits easily behind the connector's retaining nut, and simply plugs into the socket. Using th...
The rubber sealing cover protects D-Type chassis connectors from dust and water according to protection class IP65. Suitable for: - XLR D Series male - speakON NL2M* and NL4M* - powerCON 20 A Serie...
This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colors. Suitable for: XLR D Series female XLR D Seri...
Soft plastic cover for the rear ends of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables – y...
JST 1.8 mm Wire to Board LEA Connector. The JST LEA Connector 1.8 mm pitch System provides is low profile with a PCB height of only 3 mm suitable for LED lighting. The LEA Connector System has a se...
RS Pro Nut ; Bezel. From RS Pro, these accessories are designed to be used with the RS Pro range of jack sockets. The combined nut and bezels are a high quality plastic which come in black, grey an...
HDMI Plug Connector Cover. From Wurth Elektronik, this connector cover is for plugging into HDMI sockets to protect them when they are un-mated. It is constructed from Polyethylene (PE).
RS Pro Nut ; Bezel. From RS Pro, these accessories are designed to be used with the RS Pro range of jack sockets. The combined nut and bezels are a high quality plastic which come in black, grey an...
RS Pro Nut ; Bezel. From RS Pro, these accessories are designed to be used with the RS Pro range of jack sockets. The combined nut and bezels are a high quality plastic which come in black, grey an...
Not to be used as mains connectors. XX Series Identification Boots and Collars. Identification boots and collars for the XX series XLR connectors. Supplied in a pack of 9 colours, Brown, Red, Orang...
Not to be used as mains connectors. P Series XLR Panel Connectors. Precision engineered audio connectors. Their construction ensures reliable connection for both power and low level signal circuitr...
This range of dust covers are designed to fit Feedthrough connectors. They simply push CLIFF into the front of the connector to reduce ingress of dust and dirt. They fit both our plastic and metal fe...
RS Pro Recess Plate. From RS Pro, this high-quality recess plate is used with the RS Pro range of 6.35 mm gold jack sockets. Its nicely brushed finish, ensures it will sit flush and does not look o...
RS PRO Dust Caps RS PRO introduces this brilliant range of dust covers that are designed to fit RS Pro Feedthrough connectors. Easy to use they simply push into the front of the connector to reduce ...
RS XLR Chassis Blanking Plate. Brought to you under the trusted RS Brand, these XLR format blanking plates are an ideal cable management solution for network racking. Available in this range: Stock...
RS XLR Chassis Blanking Plate. Brought to you under the trusted RS Brand, these XLR format blanking plates are an ideal cable management solution for network racking. Available in this range: Stock...
The FT series of true, feed through, data connectors for electrical instrumentation are perfect for developing custom I/O configurations for wall plates, rack panels, etc. All fit within a standard...
The FT series of true, feed through, data connectors for electrical instrumentation are perfect for developing custom I/O configurations for wall plates, rack panels, etc. All fit within a standard...
The FT series of true, feed through, data connectors for electrical instrumentation are perfect for developing custom I/O configurations for wall plates, rack panels, etc. All fit within a standard...
Not to be used as mains connectors. P Series XLR Panel Connectors. Precision engineered audio connectors. Their construction ensures reliable connection for both power and low level signal circuitr...
JST Board to Board and Wire to Board LEB Connectors. The JST LEB Connector 4.0 mm pitch Board to Board or Wire to Board System is low profile with a PCB height of only 2.7 mm suitable for LED light...
Not to be used as mains connectors. XX Series Identification Boots and Collars. Identification boots and collars for the XX series XLR connectors. Supplied in a pack of 9 colours, Brown, Red, Orang...
XLR Connector Sealing Gaskets. Brought to you under the trusted RS Pro brand, these gaskets are for sealing and colour coding XLR connectors. Each gasket comes complete with two small brass spacers...
Reversible USB 3.0 gender changer (type A and B), Nickel D-housing The NAUSB3 is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional pa...
The NAUSB3-B is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector....
JST Board to Board and Wire to Board LEB Connectors. The JST LEB Connector 4.0 mm pitch Board to Board or Wire to Board System is low profile with a PCB height of only 2.7 mm suitable for LED light...
