Through Hole Resistors (206 items)

Thick-film on ceramic offers a highly compact resistor technology for surge and overload applications. This Application Note illustrates some of the many applications, which range from PSU inrush s...

Thick-film on ceramic offers a highly compact resistor technology for surge and overload applications. This Application Note illustrates some of the many applications, which range from PSU inrush s...

Thick-film on ceramic offers a highly compact resistor technology for surge and overload applications. This Application Note illustrates some of the many applications, which range from PSU inrush s...

Thick-film on ceramic offers a highly compact resistor technology for surge and overload applications. This Application Note illustrates some of the many applications, which range from PSU inrush s...

Resistance = 1.2kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.2kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 1.5kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.5kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 1.5Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.5Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.8kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 1.8kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.8Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 100kΩ Power Rating = 14W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 100mΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

CECC approved Suitable for harsh environments Impervious lead free vitreous enamel coating Overload characteristics ideal for protection circuits High stability and reliability High power dissipati...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 100Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

CECC approved Suitable for harsh environments Impervious lead free vitreous enamel coating Overload characteristics ideal for protection circuits High stability and reliability High power dissipati...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 10kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 10kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

CECC approved Suitable for harsh environments Impervious lead free vitreous enamel coating Overload characteristics ideal for protection circuits High stability and reliability High power dissipati...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 10Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 120mΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 120Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 120Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 12kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Maximum Operating Temperature = +200°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 12Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 12Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C