Through Hole Resistors (209 items)

Ohmite Slim-MOX Series Precision Thick Film Resistors. Ohmite Slim-MOX series precision thick film resistors provide stable performance for a wide range of resistance values, with voltage ratings u...

Ohmite Super-MOX Series Precision Thick Film Resistors. Ohmite high-voltage Super-MOX series resistors have been developed to meet the precision temperature stability requirements of high-accuracy ...

Ohmite Slim-MOX Series Precision Thick Film Resistors. Ohmite Slim-MOX series precision thick film resistors provide stable performance for a wide range of resistance values, with voltage ratings u...

Ohmite OK Series Little Rebel® Resistors. Ohmite OK series Little Rebels® are economical low wattage resistors. Constructed of a pure carbon film deposited on a high-grade ceramic body, these units...

OY Series Ceramic Axial Resistors. Ohmite OY Series of fixed ceramic resistors are ideal for circuitry associated with surges, high peak power or high energy. They offer enhanced performance in hig...

Ohmite Mini-MOX Series Precision Thick Film Resistors. Ohmite Mini-MOX series precision thick film resistors are versatile, covering a wide resistance range and a wide range of operating voltages. ...

40 Series Wirewound Axial Resistors. Ohmite 40 Series resistors are economical conformal silicone-ceramic coated resistors. These all-welded resistors are characterised by their low temperature coe...

Resistance = 1.2kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.2kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 1.5kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.5kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 1.5Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.5Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.8kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 1.8kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 1.8Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 100kΩ Power Rating = 14W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 100mΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

CECC approved Suitable for harsh environments Impervious lead free vitreous enamel coating Overload characteristics ideal for protection circuits High stability and reliability High power dissipati...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 100Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

CECC approved Suitable for harsh environments Impervious lead free vitreous enamel coating Overload characteristics ideal for protection circuits High stability and reliability High power dissipati...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 10kΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 10kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

CECC approved Suitable for harsh environments Impervious lead free vitreous enamel coating Overload characteristics ideal for protection circuits High stability and reliability High power dissipati...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 10Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 120mΩ Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 120Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 120Ω Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C

Resistance = 12kΩ Power Rating = 7W Tolerance = ±5% Technology = Wire Wound Series = W20 Maximum Operating Temperature = +200°C Minimum Operating Temperature = -55°C

As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the g...

Resistance = 12Ω Power Rating = 3W Tolerance = ±5% Technology = Wire Wound Series = W20 Temperature Coefficient = ±200ppm/°C Minimum Operating Temperature = -55°C