Server Cabinet Accessories (266 items)

Type = Assembly Kit Dimensions = 500 x 900 x 30mm For Use With = Enclosure

Type = Blanking Panel Series = Actassi Rack Units = 1U

Type = Cable Entry Panel Height U = 1U

Type = Plate

19'' cable feedthrough panels - For organising and running patch cords - Black RAL 9005

Type = Patch Panel Series = Actassi Dimensions = 44.5mm Rack Units = 1U

Type = Patch Panel Series = Actassi Dimensions = 44.5mm Rack Units = 1U

KM - Standard Card Fronts. Anodised aluminium front panels for use with Euro-cards fitted with 2-part indirect edge connectors to DIN41612

RS PRO Solid Document Pocket. Introducing the RS PRO range of solid document wallets, suitable for use with any enclosure or server cabinet. The holder allows easy mounting onto any surface to prov...

Available separately: Ventilated or Un-ventilated Top Covers, manufactured from 0.9 mm steel finished in Light Grey and supplied complete with two screws. RS PRO 19 inch Steel Chassis Rack Mount Tr...

Card ; Module Guide. Anti-vibration facility Secured to front tie bar using M2.5 x 5mm screws For standard Eurocards 1.6mm thick For Eurocard modules, rail thickness 1.6mm

Available separately: Ventilated or Un-ventilated Top Covers, manufactured from 0.9 mm steel finished in Light Grey and supplied complete with two screws. RS PRO 19 inch Steel Chassis Rack Mount Tr...

Available separately: Ventilated or Un-ventilated Top Covers, manufactured from 0.9 mm steel finished in Light Grey and supplied complete with two screws. RS PRO 19 inch Steel Chassis Rack Mount Tr...

For retro-fitting various fan units or to supplement the fan mounting plate and modular fan roof.

For time-saving and simple installation of the LED system light.

For simple, time-saving connection of the LED system light.

For time-saving and simple installation of the LED system light.

For simple, time-saving connection of the LED system light.

For simple, time-saving connection of the LED system light.

For time-saving and simple installation of the LED system light.

For simple, time-saving connection of the LED system light.

For simple, time-saving connection of the LED system light.

For simple, time-saving connection of the LED system light.

Divides the enclosure width into two zones. For example, this allows mounting plates, cable clamp rails or swing frames from 600 mm wide enclosures to be fitted in 1200 mm wide enclosures.

Divides the enclosure width into two zones. For example, this allows mounting plates, cable clamp rails or swing frames from 600 mm wide enclosures to be fitted in 1200 mm wide enclosures.

The filter mat is simply inserted into the trim panel from the rear. May be shortened to required length.

For simple, time-saving connection of the LED system light.

Within the network distributor, this serves as a flexible infill panel, the brush strip facilitatesconvenient cable routing from the side and rear distributor area to the front connection level.

Rittal - LCD monitor - 15" - rack-mountable - 1024 x 768 - 400 cd/m² - 700:1 - DVI-D, VGA - RAL 7035, powder coated aluminium

Rittal - LCD monitor - 17" - rack-mountable - 1280 x 1024 - 350 cd/m² - 1000:1 - DVI-D, VGA - RAL 7035, powder coated aluminium

Rittal - LED monitor - 15" - rack-mountable - touchscreen - 1024 x 768 - 400 cd/m² - 700:1 - DVI-D, VGA - RAL 7035, powder coated aluminium

Installation variant for surfaces and command panels.

1 U chassis with 17" TFT display, English or German keyboard layout, with telescopic slides.

1 U chassis with 17" TFT display, English or German keyboard layout, with telescopic slides.

Rittal Monitor/Keyboard Unit - KVM console - PS/2, USB - German - 17" - rack-mountable - 1280 x 1024 - 350 cd/m² - 1000:1 - DVI, VGA - RAL 9005 - 1U

1 U chassis with 17" TFT display, English or German keyboard layout, with telescopic slides.

For securing and stabilising two pairs of 482.6 mm (19˝) mounting angles in the Data Rack, the length is adjustable.

Front outlet grille 2 U for tangential fans to expel the hot air to the outside from the upper section of the enclosure. Two grilles may be used for natural convection.

For protected cable routing between the front and rear installation area.

Type = Combination Rail Height = 1U

Connection cable, ready to connect, with adaptor connector C13 (jack) and C14 (connector).

One or two infeeds, with on or three phases; redundant after changing the plug-in module's direction of connection. With measurement option in conjunction with the CMC III system.

One or two infeeds, with on or three phases; redundant after changing the plug-in module's direction of connection. With measurement option in conjunction with the CMC III system.

Rittal SK - Liquid cooling system coolant

Rittal SK - Liquid cooling system coolant

Rittal SK - Liquid cooling system coolant

Apart from the recooling systems for oil and emulsion, all other recooling systems are only suitable for the cooling of water or a water/glycol mixture. As well as protecting against frost, this co...

Depth-variable top hat rail for installed equipment to DIN 43 880, sizes 1 – 3 , maximum accommodation of 22 items of installed equipment.

For time-saving and simple installation of the LED system light.

Suitable for accommodating keyboards up to max. 390 x 32 x 139 mm. Supports standard mouse or trackball.

Suitable for accommodating keyboards up to max. 460 x 42 x 170 mm. Supports standard mouse and mousepad.

For enclosures with TS frame construction in series IW, PC.

The 1 U drawer for storing surplus cables in an organised, compact and secure way within the 482.6 mm (19˝) levels, may be fitted between two 482.6 mm (19˝) levels, independent from the enclosure s...

Space-saving drawer to accommodate 482.6 mm (19") keyboards - Fully extendible, with strain relief and hinged cable support. - Lockable at the front

For front attachment to mounting angles, 482.6 mm (19"). With cover and telescopic slides to accommodate assignment lists, operating manuals and small parts.

For front attachment to mounting angles, 482.6 mm (19''). With cover and telescopic slides to accommodate assignment lists, operating manuals and small parts.

For use as a stand-alone fan, and for upgrading various fan units or to supplement the fan mounting plate.

Fan expansion kit for fan mounting plate Rated operating voltage: 230V; Power consumption: 19/18W at 50/60 Hz; Air throughput (unimpeded air flow): 160 - 180 mТГ/h at 50/60 Hz; Temperature range: -...

Guide frame for Vario rack-mounted fan: Installation directly in the subrack, via two mounting brackets on the 482.6 mm (19") mounting angles.

Guide frame for Vario rack-mounted fan: Installation directly in the subrack, via two mounting brackets on the 482.6 mm (19") mounting angles.

With numerical labelling on a 482.6 mm (19˝) pitch pattern for clear identification of the various height units, up to a maximum of 56 U.

For programming units etc., prepared for mounting on the tubular door frame of TS, SE, CM, PC or on any sufficiently large surface.

For fastening to tubular door frames at any height.

With special DIN punchings for direct mounting on the enclosure section or on surfaces such as mounting plates.

For mounting twin castors and levelling feet to the VX base/plinth system.

Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply locate into the 482.6 mm (19") system punchings and secure.

Type = Punched Section Dimensions = 17 x 73mm For Use With = Enclosures

With cut-out 390 x 40 mm (2 U) or 390 x 20 mm (1 U) with brush insert, accommodation facility for cable clamp straps.

Including main door latch for safety locking of enclosures and bayed enclosure suites in accordance with UL regulations. Tested in conjunction with actuator lever for master switch.

Including main door latch for safety locking of enclosures and bayed enclosure suites in accordance with UL regulations. Tested in conjunction with actuator lever for master switch.

Including main door latch for safety locking of enclosures and bayed enclosure suites in accordance with UL regulations. Tested in conjunction with actuator lever for master switch.

Including main door latch for safety locking of enclosures and bayed enclosure suites in accordance with UL regulations. Tested in conjunction with actuator lever for master switch.