Divides the enclosure width into two zones. For example, this allows mounting plates, cable clamp rails or swing frames from 600 mm wide enclosures to be fitted in 1200 mm wide enclosures.
Divides the enclosure width into two zones. For example, this allows mounting plates, cable clamp rails or swing frames from 600 mm wide enclosures to be fitted in 1200 mm wide enclosures.
Within the network distributor, this serves as a flexible infill panel, the brush strip facilitatesconvenient cable routing from the side and rear distributor area to the front connection level.
Front outlet grille 2 U for tangential fans to expel the hot air to the outside from the upper section of the enclosure. Two grilles may be used for natural convection.
One or two infeeds, with on or three phases; redundant after changing the plug-in module's direction of connection. With measurement option in conjunction with the CMC III system.
One or two infeeds, with on or three phases; redundant after changing the plug-in module's direction of connection. With measurement option in conjunction with the CMC III system.
Apart from the recooling systems for oil and emulsion, all other recooling systems are only suitable for the cooling of water or a water/glycol mixture. As well as protecting against frost, this co...
The 1 U drawer for storing surplus cables in an organised, compact and secure way within the 482.6 mm (19˝) levels, may be fitted between two 482.6 mm (19˝) levels, independent from the enclosure s...