Connecting Components (46 items)

Straight Connecting Strip XC and XD. For connecting beam ends to end.,Suitable for moment loads but for pulling loads use a yoke,Stock-no. 261-2166 (4 hole) and stock-no. 308-0217 (2 hole) include ...

Enclosure Connector Kit XD (22x22) and XF (30x30). Enables enclosure beam ends to be connected to beam sides. XD to XD, XD to XC and XF to XF,The connector is mounted directly onto the beam end wit...

Rotary Joint XC. The FlexLink Rotary Joint XC allows two XC structural beams to be attached to each other, allowing one of the beams to swing. The joint is intended for use in pairs, to avoid movem...

Aluminium Hinges. For left or right hand mounting of XC to XC, XC to XD, XD to XD, XC to XF or XF to XF beams. Fasteners included.

Multi-Block. Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A s...

Connector Type = Screw Connector Fits Groove Size = 4.2mm Thread Size = M5 Structural Element Type = Fixing & Connection Element Length = 5mm

T-slot Connector XC. Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of th...

T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nut...

T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nut...

Fixings Included. Corner Fittings XD and XC, 45° and 90°. For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fi...

Fixings Included. Corner Fittings XD and XC, 45° and 90°. For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fi...

Fixings not included. Adjustable Stay Brackets XC. For building connections or stays of optional length and angle.,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threa...

Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.

Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.

Fixings not included. 3-way Angle Bracket XF c/w Cap