Communication & Wireless Development Tools (76 items)

Universal AC Main Input voltage range: 90 VAC to 264 VAC Output range: 5 V-3 A continuous operation Constant voltage (CV) and constant current (CC) operation with CC primary sensing Output overvolt...

USB PD 3.0 compliant Universal input mains voltage range: from 90 VAC to 264 VAC (frequency from 45 Hz to 65 Hz) Three fixed PDOs available: 5 V, 9 V, 15 V – 3 A continuous operation Load power lim...

RF Technology = Antenna Design Kit Classification = Antenna Board For Use With = ST25DV64KC dual interface EEPROM Kit Name = Antenna Reference BoardMHz

The STMicroelectronics B-L475E-IOT01A Discovery kit for IoT node allows users to connect directly to the cloud by developing applications with it. It comes with a comprehensive free software HAL li...

The STEVAL-IDB006V1 is an evaluation board based on the BlueNRG-MS low power Bluetooth® Smart IC, compliant with the Bluetooth® 4.1 specifications and able to support both master and slave roles. T...

RF Technology = Bluetooth Kit Classification = Evaluation Kit For Use With = STSW-BNRGLPDK Kit Name = Bluetooth Development ToolsMHz

The STMicroelectronics is a Bluetooth low energy expansion board based on the BLUENRG-M2SP module for STM32 Nucleo. It provides Bluetooth low energy connectivity for developer applications and can ...

The STEVAL-CCC002V1 evaluation board lets you prototype a full-featured 5 V USB Type-C port with STUSB1600A, which can be configured in a source, sink or dual power role. Both source and sink VBUS ...

STMicroelectronics Development KitThe STMicroelectronics development kit is an RF discovery kit featuring the CMWX1ZZABZ-091 LoRa module from Murata. This module incorporates the SX1276 low-power t...

RF Technology = Antenna Design Kit Classification = Evaluation Board For Use With = ST25DV64KC Kit Name = Discovery KitMHz

B-L475E-IOT01A IoT node Discovery Kit. The B-L475E-IOT01A Discovery kit allows users to develop applications featuring direct connection of wireless IoT sensors to cloud servers. It is supported by...

STMicroelectronics Development KitThe STMicroelectronics development discovery kit is an 868MHz for Arduino, internet of things. The IoT node allows users to develop applications with a direct conn...

P-L496G-CELL02The P-L496G-CELL02 STM32 discovery pack for LTE IoT cellular to cloud (STM32-C2C/LTE IoT) is a turnkey development platform for cellular and cloud technology based solutions. The pack...

The ST25R3911B-DISCO is a ready-to-use kit featuring the ST25R3911B, an highly integrated HF reader / NFC initiator IC. The ST25R3911B-DISCO can be operated as ISO18092 (NFCIP-1) active and passive...

The STMicroelectronics X-NUCLEO-IOD02A1 expansion board for STM32 Nucleo is based on the L6364Q dual channel SIO and IO-Link PHY device transceiver embedding 50 mA 3.3 V and 5.0 V voltage regulator...

The STEVAL-FKI001V1 development kit is a cost-effective tool to help you design solutions based on Sigfox™, Bluetooth® low energy and sub-1GHz technologies. The kit features a fully programmable mo...

Classification = Evaluation Board Kit Classification = Evaluation Kit For Use With = CMOS Featured Device = VN9004AJ Kit Name = EV-VN9004AJ

Classification = Evaluation Board Kit Classification = Evaluation Kit For Use With = CMOS Featured Device = VN9008AJ Kit Name = EV-VN9008AJ

Classification = Evaluation Board Kit Classification = Evaluation Kit For Use With = CMOS Featured Device = VND9012AJ Kit Name = EV-VND9012AJ

Communication & Wireless Development Tools

STMicroelectronics Evaluation BoardThe STMicroelectronics evaluation board is a platform based on the BlueNRG-1, low power Bluetooth smart system on a chip, compliant with the Bluetooth® specificat...

The STEVAL-ISC004V1 evaluation board is a ready-to-use USB PD source based on STUSB4710A and ST1S14 ICs. It demonstrates how to convert a fixed voltage DC power input into a USB PD variable voltage...

STMicroelectronics Evaluation BoardThe STMicroelectronics STEVAL-ISC005V1 evaluation board is a ready-to-use USB PD sink based on the STUSB4500. The board handles the USB PD negotiation with a sour...

The STMicroelectronics STEVAL-IDB011V1 evaluation platform is designed to help you develop and test Bluetooth® low energy applications using the low power BlueNRG-LP system-on-chip in combination w...

The STEVAL-IDB008V2 evaluation platform is based on the BlueNRG-2, low power Bluetooth® smart system on chip with 256 KB Flash, 24 KB RAM, compliant with the Bluetooth® SMART v5.0 specification, su...

The STEVAL-IDB009V1 evaluation platform is based on the BlueNRG-248 (QFN48), low power Bluetooth® system on chip with 256 KB Flash and 24 KB RAM. The BlueNRG-2 chip is compliant with the Bluetooth®...

Communication & Wireless Development Tools

The STMicroelectronics evaluation board is based on the Bluetooth v5.0 compliant BlueNRG-M2SA module with embedded BlueNRG-2 low power Bluetooth LE SoC able to function as a master or slave or in a...

RF Technology = Bluetooth Kit Classification = Evaluation Board For Use With = BlueNRG-LPS

The STMicroelectronics have evaluation board is based on the certified Teseo-LIV3F global navigation satellite system module with embedded teseoIII single die standalone positioning receiver IC. Th...

Operating supply voltage: 3.3 - 5 V Ambient temperature: -40/+85 °C Sensitivity: -162 dBm indoor (tracking mode) Interfaces: a UART port an I²C port Configurable digital I/O timepulse EXTINT input ...

L6362A IO-Link device transceiver main characteristics: IO-Link PHY layer Dedicated overload diagnostics pin UART interface Selectable 12 mA 3.3 V or 10 mA 5.0 V linear regulator Overload and overh...

STMicroelectronics IO-Link Master Evaluation BoardThe STMicroelectronics STEVAL-IOM001V1 IO-Link master evaluation board is based on the L6360 IO-Link master transceiver with physical layer complia...

The STMicroelectronics IO-Link master multi-port evaluation board is based on L6360. It is developed to create a multi-port master based on serial asynchronous communication to support the IO-Link ...

The STEVAL-IKR002V4D product evaluation board is based on the SPIRIT1, a very low-power RF transceiver intended for RF wireless applications in the sub 1 GHz frequency band.SPIRIT1 low power sub GH...

The STEVAL-IKR002V1 development kit includes 2 RF daughterboards based on the SPIRIT1 low power, sub-GHz low data rate transceiver suitable for ISM bands and 2 motherboards based on the STM32L low ...

The STEVAL-IKR002V3D product evaluation board is based on the SPIRIT1, a very low-power RF transceiver intended for RF wireless applications in the sub 1 GHz frequency band.protection single

The STEVAL-IKR002V5D product evaluation board is based on the SPIRIT1, a very low-power RF transceiver intended for RF wireless applications in the sub 1 GHz frequency band.SPIRIT1 low power sub GH...

The STEVAL-IKR002V4B evaluation daughterboard is based on the SPIRIT1, a sub-GHz low power, low data rate transceiver suitable for ISM bands and wireless M-BUS. The board is equipped with external ...

The M24SR-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the M24SR series and is based on the M24SR64 device. Two versions of this kit are available: the Standard Edi...

The STKNX is a transceiver device for KNX TP communication. The small package and few external components enable the very compact KNX nodes design. The simple interface to the μC allows easy replac...

For Use With = KNX TP Communication Featured Device = TP1-256 Kit Name = Miniature KNX Transceiver with Voltage Regulators

RF Technology = Near Field Communication (NFC) Technology = Motion Tracking Module For Use With = STM32 32-bit Arm Cortex MCUs Featured Device = ST25DV64K, STM32WB5MMG, STM32WL55JC, Teseo-LIV3F Kit...

ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running...

The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4. The device is fully po...

STM32 Nucleo boards allow anyone to try out new ideas and to quickly create prototypes with any STM32 MCU. Sharing the same connectors, STM32 Nucleo boards can easily be extended with a large numbe...

The STM32 ODE “;Connect Series”; of Nucleo Expansion Boards (X-Nucleos) are designed to deliver to the STM32 ODE Ecosystem the essential wireless and wired connectivity associated with both industr...

The STMicroelectronics P-NUCLEO-IOD02A1 is an STM32 Nucleo pack composed of the X-NUCLEOIOD02A1 and X-NUCLEO-IKS02A1 expansion boards stacked on the NUCLEOL452RE development board. The X-NUCLEO-IOD...

Classification = Development Kit Kit Classification = Development Kit Featured Device = IPS4260LM, L6364Q, STM32G071RB Kit Name = P-NUCLEO-IOD7A1

The STEVAL-IDB005V1D is an RF daughterboard platform based on the BlueNRG-MS low power Bluetooth® Smart IC, compliant with the Bluetooth® 4.1 specifications and supporting both master and slave rol...

ST offers a comprehensive range of evaluation boards that for Communication and Connectivity solutions for use in mobile computing, communication and media devices. Explore the range of evaluation ...

SPIRIT1 RF Transceiver Chip USB Dongles. The STEVAL-IDS001Vx board is an evaluation/demonstration tool for the SPIRIT1 low-power sub-1GHz ISM band RF devices. SPIRIT1 is fully compatible with the w...

SPIRIT1 RF Transceiver Chip USB Dongles. The STEVAL-IDS001Vx board is an evaluation/demonstration tool for the SPIRIT1 low-power sub-1GHz ISM band RF devices. SPIRIT1 is fully compatible with the w...

2 x RF Motherboards, 2 x RF Daughterboards. SPIRIT1 RF Transceiver Development Kits. The STEVAL-IKR002Vx development kit includes two RF daughterboards based on the SPIRIT1 low-power, sub-1GHz tran...

RF Expansion Boards based on SPSGRF-915 and SPSGRF-868 Modules for STM32 Nucleo, STMicroelectronics. The evaluation boards are based on the SPIRIT1 RF module SPSGRF-xxx, a Low data rate, low power ...

RF Expansion Boards based on SPSGRF-915 and SPSGRF-868 Modules for STM32 Nucleo, STMicroelectronics. The evaluation boards are based on the SPIRIT1 RF module SPSGRF-xxx, a Low data rate, low power ...

Classification = Evaluation Kit Kit Classification = Evaluation Kit For Use With = ECMF02-2HSMX6, ECMF4-2450A60N10 Featured Device = STEVAL-OET005 Kit Name = ST STEVAL-OET005VD

The STMicroelectronics high-power RAIN® RFID reader system based on the ST25RU3993 device. It has external and internal SW controlled power amplifier options.Differential RX input Host interface an...

The STEVAL-XPLM01CPL is a simple yet very useful tool for power line communication testing on AC power networks. It includes simple two-wire connectivity to any PLC transmitter/receiver and a stand...

RF Technology = Extension Board Kit Classification = Expansion Board For Use With = STM32 Nucleo Featured Device = L6364W Kit Name = STEVAL-IOD002V1GHz

The P-NUCLEO-LRWAN3 STM32 Nucleo starter pack for LoRa® technology and high-performance (G)FSK/OOK/(G)MSK modulations is a development tool to learn and quickly develop low-power wide-area network ...

The X-NUCLEO-STMODA1 provides an easy way to expand your STM32 Nucleo board with the STMod+ connector, which allows interaction with the new set of STM32 Nucleo development boards using this connec...

Communication & Wireless Development Tools

The ST8034xx interface devices are placed between the smartcard and the microcontroller to provide all supply, protection, detection and control functions, with a minimum of external components. Th...

The STEVAL-IPT005V1 product evaluation board is designed both for standalone operation or to be controlled by the microcontroller. The board is fully configurable, provides access to all signals in...

S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands STM32 Nucleo-64 development board with STM32L0 MCU Suitable for wireless M-Bus...

The STEVAL-FKI868V2 evaluation board is based on the S2-LP sub-1GHz ultra-low power low data-rate transceiver suitable for ISM bands and wireless M-Bus. The NUCLEO-L053R8 motherboard is equipped wi...

The STEVAL-IKR002V1D product evaluation board is based on the SPIRIT1, a very low-power RF transceiver intended for RF wireless applications in the sub 1 GHz frequency band.SPIRIT1 low power sub GH...

RF Technology = GNSS Kit Classification = Evaluation Board For Use With = Teseo-LIV3FL

Classification = Evaluation Board Kit Classification = Evaluation Board Featured Device = Teseo-LIV4F Kit Name = Teseo-LIV4F Dual Band GNSS Module Evaluation Board

The AEKD-USBTYPEC1 evaluation kit is designed to let you test the USB Power Delivery protocol stack implemented on the ASIL-B 32-bit Power Architecture® microcontroller SPC58 C (Chorus) line (from ...

The STMicroelectronics Voltage adapter board is an additional module for the STLINK-V3SET, performing voltage adaptation for STM32 microcontroller targets running below 3.3 V down to 1.65 V.Operati...

RF Technology = GNSS, GPS Featured Device = STM32 Nucleo Kit Name = X-NUCLEO-GNSS2A1

The STMicroelectronics X-NUCLEO-S2868A2 expansion board is based on the S2-LP ultra-low power RF transceiver and operates in the 868MHz ISM frequency band. The X-NUCLEO-S2868A2 interfaces with the ...

The STMicroelectronics X-NUCLEO-S2915A1 expansion board is based on the S2-LP radio and operates in the 915 MHz ISM frequency band. The expansion board is compatible with ST morpho and Arduino UNO ...

X-NUCLEO-NFC01A1 Dynamic NFC Tag Expansion Board. The X- NUCLEO -NFC01A1 is a Dynamic NFC tag evaluation board compatible with STM32 Nucleo boards. It can be operated from an I²C interface or by a ...