Communication & Wireless Development Tools (205 items)

1-Wire I2C click carries the DS28E17 1-Wire-to-I2C master bridge from Maxim Integrated. The click runs on a 3.3V power supply. It communicates with the target microcontroller over 1-Wire® protocol,...

1The MikroElektronika MIKROE-3743 (I2C to SPi Click) is an all-in-one solution which allows serving as an interface between a standard I2C-bus of a microcontroller and an SPi bus, which allows the ...

Click board comes with the header strips soldered. 3G-AA Click mikroBUS™. 3G-AA Click is a mikroBUS™ add-on board with an Quectel UG95 3G UMTS/HSPA Ultra-small module for high-speed and high qualit...

4G LTE-NA click carries the LARA-R204 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target m...

Kit Classification = mikroBus Click Board For Use With = Stationary IoT Applications Featured Device = ENS22 Kit Name = 5G NB IoT Click

Classification = Transceiver Kit Technology = UART Featured Device = ISO1450

6LoWPAN C click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional fu...

6LoWPAN clicker is a compact development board with a mikroBUS™ socket for click board connectivity. It carries Microchip’s PIC32MX470F512H - 120 MHz/150 DMIPS, MIPS32® M4K® core microcontroller. A...

6LoWPAN T click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional fu...

Classification = Expansion Module Kit Classification = Expansion Module Featured Device = TCAL6408 Kit Name = 8 Bit I/O Expander From Texas InstrumentsMHz

Classification = Wireless Module Technology = I2C Featured Device = TCAL9538 Frequency = 1MHz

The MikroElektronika AM/FM click, It is a radio receiver click board that can be used to listen to music from the AM and FM radio band. One of the advantages of this versatile FM broadcast stereo h...

ATA6563 click carries the ATA6563 high-speed CAN transceiver. The click is designed to run on a 5V power supply. Use the VIO SEL jumper for selecting the 3.3V or 5V logic level. It communicates wit...

MikroElektronika ATA6570 Click BoardThe MikroElektronika ATA6570 click is a Controller Area Network (CAN) partial networking interface board which carries the high speed CAN transceiver. This trans...

Classification = Add On Board Technology = Transceiver Featured Device = ATA6571 Kit Name = ATA6571 Click