1-Wire I2C click carries the DS28E17 1-Wire-to-I2C master bridge from Maxim Integrated. The click runs on a 3.3V power supply. It communicates with the target microcontroller over 1-Wire® protocol,...
1The MikroElektronika MIKROE-3743 (I2C to SPi Click) is an all-in-one solution which allows serving as an interface between a standard I2C-bus of a microcontroller and an SPi bus, which allows the ...
Click board comes with the header strips soldered. 3G-AA Click mikroBUS™. 3G-AA Click is a mikroBUS™ add-on board with an Quectel UG95 3G UMTS/HSPA Ultra-small module for high-speed and high qualit...
Click board comes with the header strips soldered. 3G-EA Click mikroBUS™. 3G-EA Click is a mikroBUS™ add-on board with an Quectel UG95 3G UMTS/HSPA Ultra-small module for high-speed and high qualit...
4G LTE-APJ click is an LTE Cat 1 / UMTS multimodecellular network solution, featuring the compact LARA-R2 series modem from u-blox. This module supports up to three LTE bands and one UMTS band. It ...
4G LTE-NA click carries the LARA-R204 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target m...
6LoWPAN C click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional fu...
6LoWPAN clicker is a compact development board with a mikroBUS™ socket for click board connectivity. It carries Microchip’s PIC32MX470F512H - 120 MHz/150 DMIPS, MIPS32® M4K® core microcontroller. A...
6LoWPAN T click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional fu...
The MikroElektronika AM/FM click, It is a radio receiver click board that can be used to listen to music from the AM and FM radio band. One of the advantages of this versatile FM broadcast stereo h...
ATA6563 click carries the ATA6563 high-speed CAN transceiver. The click is designed to run on a 5V power supply. Use the VIO SEL jumper for selecting the 3.3V or 5V logic level. It communicates wit...
MikroElektronika ATA6570 Click BoardThe MikroElektronika ATA6570 click is a Controller Area Network (CAN) partial networking interface board which carries the high speed CAN transceiver. This trans...
Click board comes with the header strips soldered. ATA663211 click mikroBUS™. ATA663211 click is a mikroBUS add-on board for connecting directly to the Local Interconnect Network (LIN) bus. It feat...
Supply voltage up to 40V Operating voltage VS = 5V to 28V Supply current Sleep mode: typically 9μA Silent mode: typically 47μA Very low current consumption at low supply voltages (2V < VS < 5.5V): ...
AudioMUX click is a sound processing Click board™ with digital controls, based on the TDA7468D IC. It can be used to select one of four audio input channels, adjust its frequency response and volum...
The BBC micro:bit is a credit card sized microcontroller development system, with a very simple and user-friendly visual programming interface, designed to introduce the kids to the world of embedd...
Click board comes with the header strips soldered. ZigBEE click mikroBUS™. The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. BEE cli...
Classification = Add On Board Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = Bluetooth Low Energy (BLE) module Kit Name = BLE 12 Click
Click board comes with the header strips soldered. BLE 3 click mikroBUS™. BLE 3 click is a mikroBUS add-on board for adding Bluetooth Low Energy (BLE) connectivity. It features the u-blox NINA-B1, ...
The MikroElektronika BLE 5 Click is a Click board™ witch provide BT/BLE connectivity for any embedded application. BLE 5 click based on the PAN1760A, a module from Panasonic. The Click board™ with ...
The MikroElektronika BLE 6 Click is a Bluetooth low energy system-on-chip application processor certified module, compliant with BT specifications v5.0 and BQE qualified. The featured BlueNRG-M2 mo...
RF Technology = BLE Module Kit Classification = mikroBus Click Board For Use With = Health, Sports, Wellness Devices Featured Device = BGX13S22GA-V31 Kit Name = BLE 7 Click
The MikroElektronikas BLE 8 Click is fully embedded stand-alone Bluetooth 5.0 Energy connectivity module, equipped with the ANNA-B112, an ultra-small, high-performing, standalone Bluetooth low ener...
RF Technology = Bluetooth Smart (BLE) Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = 74LVC1G3157, DA14531MOD Kit Name = BLE TINY Click
Classification = Add On Board Technology = Bluetooth Module For Use With = mikroBUS socket Featured Device = Bluetooth 5.2 transmitter Kit Name = BLE TX Click
Click board comes with the header strips soldered. BLE2 click mikroBUS™. The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. The BLE2 ...
The MikroElektronika BT Audio 2 Click is Bluetooth audio stream add on board based on BM62 module from Microchip. Its a Stereo Audio module which is fully qualified Bluetooth v5.0 dual-mode (BDR/ED...
Click board comes with the header strips soldered. BT Audio click mikroBUS™. BT Audio click is a mikroBUS add-on board for delivering high-quality stereo digital audio in a compact design. The Micr...
Kit Classification = mikroBus Click Board For Use With = Ethernet Based Open Network Featured Device = BCM54811, PIC16F18313, W3150A+ Kit Name = BroadR-Reach Click
Click board comes with the header strips soldered. CAN SPI click mikroBUS™. The CAN SPI click add-on board is great for adding CAN connectivity to your industrial and home automation designs. Featu...
Classification = Transceiver Board Technology = CAN For Use With = Automotive, Industrial Applications Featured Device = TLE9255W Kit Name = CAN FD 2 Click
Classification = Transceiver Board Kit Classification = Sensor Add-On Board For Use With = BCM, Gateway Modules Featured Device = TLE9251V Kit Name = CAN FD 3 Click
Classification = Transceiver Board Kit Classification = Sensor Add-On Board For Use With = Automotive, Industrial Applications Featured Device = NCV7344D10R2G Kit Name = CAN FD 4 Click
CAN Isolator click provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter. The click is designed to run...
CAN SPI click 5V is an accessory board in mikroBUS form factor. It is the best solution to add CAN connectivity to your microcontroller with SPI interface.
MikroElektronika DALI 2 Click boardThe MikroElektronika DALI 2 click board is a simple and reliable interface to DALI and DALI 2 communication bus, making it possible to dive into the world of inte...
Click board comes with the header strips soldered. DALI Click mikroBUS™. DALI Click is a mikroBUS add-on board for network-based systems which controls the lighting in building automation. The Digi...
Classification = Add On Board Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = MT8870D, PCA9536 Kit Name = DTMF Decoder Click
Click board comes with the header strips soldered. RS232 click mikroBUS. The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. RS232 cli...
The MikroElektronika Dot Matrix R Click is a display device Click board™ based on a four-digit dot matrix display module, labelled as HCMS-3906 from a company Avago (Broadcom Inc). The module holds...
