For Use With = Programmable Logic Controller, Remote Input Module Kit Classification = Development Board Featured Device = CLT03-1SC3, CLT03-2Q3 Kit Name = Self Powered Digital Input Current Limiter
Power ratings: input DC voltage: 375 V to 425 V output voltage: 48 V maximum output current: 62.5 A output power: 3 kW peak efficiency: 95.3% HF transformer isolation voltage: 4 kV Resonant and swi...
STEVAL-ISA172V2 AC-DC D-SMPS Evaluation Board for STM32F334. The STMicroelectronics STEVAL-ISA172V2 is a digital AC-DC power supply (D-SMPS) evaluation board. The board features two power sections;...
The STMicroelectronics bridgeless totem pole boost circuit achieves a digital power factor correction (PFC) with inrush current limiter (ICL). It helps you to design an innovative topology with the...
The STEVAL-IPFC12V1 2 kW interleaved PFC reference design features the performance of analog cycle-by-cycle current regulation and the flexibility of digital control to generate sinusoidal supplies...
The 3 kW interleaved PFC evaluation kit features: power board control board adapter board Input voltage range: 90 to 265 VAC Line frequency range: 47 to 63 Hz Maximum output power: 3 kW at 230 V Ou...
The STEVAL-CTM009V1 evaluation kit for motor control is designed to demonstrate the capabilities of ST Power MOSFETs based on STripFET™ F7 technology. The 100 V STripFET™ F7 devices (STH31*N10F7) a...
The STMicroelectronics demonstration board is a resonant LLC converter dedicated to any kind of industrial application where minimum size and high efficiency is required, based on MasterGaN1. The b...
2kW 3-Phase Motor Control Evaluation Board (STGIPS20C60). The STEVAL-IHM028V2 Evaluation Board presents a universal, fully tested and populated design, consisting of a 3-phase inverter bridge, base...
The EVAL-L9907-H is designed to provide the user with a platform for the evaluation of the L9907 device. The Board provides all the main input/output capabilities necessary to drive a BLCD motor an...
STMicroelectronics Evaluation BoardThe STMicroelectronics evaluation board is designed for sensorless 3Phase BLDC motor control and composed by a motherboard and a daughterboard with pre-assembled ...
The EVLSTNRG011-150 is a 12 V, 150 W power supply demonstration board for 90 V ac to 264 Vac mains, which is representative of an AC/DC converter for an all in one (AIO) computer or general purpose...
The STMicroelectronics EVSPIN32F02Q1S1 board is a 3-phase complete inverter based on the STSPIN32F0251 controller, which embeds a 3‑phase 250 V gate driver and a Cortex®-M0 STM32 MCU. The power sta...
The STMicroelectronics STEVAL-ETH001V1 servo drive evaluation board has been developed to address three-phase PMSM applications oriented to multi-axial position control and connectivity. The evalua...
The STMicroelectronics demonstration board is a 12 V - 400 W converter, tailored for the typical specification of an AC/DC adapter with wide input mains range, very low power consumption at light l...
The EVAL-L9907 is designed to provide the user with a platform for the evaluation of the L9907 device. The Board provides all the main input/output capabilities necessary to drive a BLCD motor and ...
Power Management Function = PLC Controller For Use With = Power Supplies & Converters Kit Classification = Evaluation Board Featured Device = STM32F746ZGT7 Kit Name = STEVAL-PLC001V1
The STEVAL-CTM010V1 board embeds two sensorless 3-phase motor drives, plus a single stage digital PFC boost topology, all controlled by the STM32F303RB ARM based microcontroller. The ST FOC MC SDK ...
The STEVAL-IHM034V2 is a complete motor control kit solution for the evaluation of STMicroelectronics® wide product portfolio tailored to applications where it is necessary to drive, simultaneously...
STEVAL-VNH5019A offers dedicated power stage and controls suitable for electric DC motor driving. This evaluation board comes pre-assembled with VNH5019A H-bridge belonging to the VNH Motor Driver ...
Power Management Function = Digital Power For Use With = STM32H723VGT6 Kit Classification = Evaluation Board Kit Name = Safety-ready industrial PLC evaluation board
The SPC58EC-DISP board is a help to discover the SPC58EC80E microcontroller with full access to CPUs, GPI/Os and peripherals such as ISO CAN FD, Ethernet, FlexRay, LIN, UART at budget price. The SP...
The STEVAL-IHM039V1 demonstration board is a control stage based on STMicroelectronicss ARM™ Cortex™-M4 core-based STM32F415ZGT6 microcontroller featuring single and dual motor control. It can be u...
Power Management Function = PFC Controller For Use With = L4985 Kit Classification = Evaluation Board Kit Name = Low-THD 350W CCM-PFC pre-regulator based on L4985
Power Management Function = PFC Controller For Use With = L4986 Kit Classification = Evaluation Board Kit Name = Low-THD 350W CCM-PFC pre-regulator based on L4986
The STMicroelectronics power management IC development tools demonstration board. Tool is for evaluation of STL110N10F7, STSPIN32G4.Interface Type: CAN, I2C, SPI, UART Input Voltage: 10 V to 75 V
The STMicroelectronics EVALSTDRIVE101 is a demonstration board based on the STDRIVE101, a three-phase gate driver, and the STL110N10F7 power MOSFETs. The EVALSTDRIVE101 is designed to drive three-p...
The STMicroelectronics three phase full shunt electricity meter evaluation board works with active wideband, active fundamental, reactive and apparent power/energy calculation for each phase and cu...
The STMicroelectronics evaluation kit offers a ready-to-use servo brushless solution. The control board provides a powerful power stage, the analog circuitry implementing current sensing and overcu...
The STMicroelectronics STEVAL-NRG011TV is a 200 W LED TV SMPS providing 12 V regulated output voltage (for MCU supply and audio system applications) and 65 V output voltage for LED back lighting. T...
The STEVAL-IHT005V2 is designed as a complete solution proposal for home appliance applications based on STMicroelectronics™ components. Special emphasis is placed on demonstration of a robust full...
Power Management Function = BLDC Motor For Use With = BLCD Motor Kit Classification = Evaluation Board Featured Device = SPC560P & L9908 Kit Name = Motor Evaluation Board
The STMicroelectronics Evaluation kit for education on motor control and control systems is designed to represent a complex, non-linear and unstable oscillator for university-level robotics project...
STEVAL-ISA170V1 is a 150 W converter tailored to a typical specification for an all-in-one (AIO) computer power supply or a high power adapter. The architecture is based on a two-stage approach: a ...
The STMicroelectronics Qi-based wireless power receiver is used for Baseline Power Profile (BPP) applications up to 5 W using STWLC68. It implements a 5 watt Qi Baseline Power Profile (BPP) applica...
The EVAL- L9945 is an evaluation board designed to evaluate L9945, a smart power device designed by STMicroelectronics in advanced BCD technology. L9945 is a flexible high-side/ low-side configurab...
Power Management Function = Power Supply For Use With = Programmable Power Supply (PPS) Kit Classification = Evaluation Board Featured Device = MasterGaN, ST-ONE Kit Name = Very High Power Density ...
The EVL4984-350W demonstration board, based on the new L4984D continuous conduction modePFC controller, implements a 350 W wide-range input PFC pre-conditioner. It is suitable for allSMPS from 150 ...
The STEVAL-ISA138V1 solution evaluation board is a 90 W, wide-range mains, power-factor corrected, AC-DC adapter. Its electrical specifications are tailored to a typical hi-end portable computer po...
The STMicroelectronics dual-stage LED driver with high power factor designed for 100 W LED lighting applications using 6LoWPAN Mesh networking. The Input voltage range from 90 to 265 VAC.RoHS compl...
This document focuses on a reference design for a simple, low cost 5 V 2 A flyback converter based on the PM8800A device. The PM8800A is a highly integrated device embedding a “;Powered Device”; (P...
The STMicroelectronics fly back converter is designed for industrial or photovoltaic sectors to be used as an auxiliary power supply. The converter operates in fixed-frequency mode but it can be ea...
The STEVAL-ISV021V1 is a demonstration kit which consists of a complete energy harvesting module based on the SPV1050 ULP energy harvester and battery charger, having the purpose to show the electr...
This reference design represents a PoE Class 8 converter designed for high efficiency conversion over a wide load range. It is based on the PM8805 PoE-PD interface and a DC-DC forward active clamp ...
The STEVAL-TSP004V2 is a reference design for a PoE+, high-efficiency, 5 V/4 A flyback converter based on the PM8803 PoE controller. The PM8803 is a highly integrated device embedding a powered dev...
This reference design represents a 3.3 V, 20 A converter solution ideal for various applications including wireless access points, supplied with a PoE-PD interface and a DC-DC active clamp forward ...