Power, Motor & Robotics Development Tools (293 items)

The MikroElektronikas L meter click, It is 5V compact and accurate single high-speed voltage comparator, capable of measuring and monitoring. It measure a wide range of inductance. It is compatible...

Charger 2 click is a LiPo/Li-Ion battery charger with the additional monitoring IC onboard. This Click board™ as a whole, offers unpreceded battery charging and monitoring solution for 3.7V LiPo/Li...

Position Sensorless BLDC Drivers (no Hall Sensor required) 180° Sinusoidal Drive for High Efficiency and Low Acoustic Noise Supports 2V to 14V Power Supplies Speed Control through Power Supply Modu...

Brushless 5 click is a 3 phase sensorless BLDC motor controller, with a soft-switching feature for reduced motor noise and EMI, and precise BEMF motor sensing, which eliminates the need for Hall-se...

Eliminates External Components and Reduces Total Cost No Schottky-Synchronous Operation for High Efficiency and Reduced Cost Internal compensation for Stable Operation at Any Output Voltage All Cer...

Reduces External Components and Total Cost No Schottky-Synchronous Operation Internal Compensation for Any Output Voltage Built-In Soft-Start All-Ceramic Capacitors, Compact Layout Reduces Number o...

Factory trimmed AC and DC current sensor analogue ratiometric output voltage Combining sensing element, signal conditioning & isolation in small foot print and low profile SOIC package No applicati...

Boost-INV 2 click is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 15V and inverted to -15V, from a single fixed voltage input. The i...

Output Voltages: 3.2V to 12.775V and –1.2V to –13.95V (LT3582) 5V and –5V (LT3582-5) 12V and –12V (LT3582-12) Digitally Re-Programmable (LT3582) via I2C for: Output Voltages Power Sequencing Output...

Supports up to 20V Output Pull-up Voltage –40°C to 125°C Operating Temperature Range Supports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive Coils Low Output VOL of 0.4V (Typical) W...

H-Bridge 2 click can be used to drive a motor by utilizing a specific configuration of the output stage MOSFETs, known as the H-bridge. This configuration enables H-Bridge 2 click to drive a motor ...

No external sense resistor required, single package solution Reduced power loss: 0.6 mΩ internal conductor resistance on EX package 1.2 mΩ internal conductor resistance on LC package Economical low...

12-bit resolution ± 1 LSB max DNL ± 1 LSB max INL (MCP3204/3208-B ± 2 LSB max INL (MCP3204/3208-C 4 (MCP3204) or 8 (MCP3208) input channels analogue inputs programmable as single-ended or pseudo-di...

Micropower Operating Current (0.9μA typ, 1.7μA max) Preserves Battery Power Tiny 1.11mm x 0.76mm 6-Bump WLP and SOT23 Packages Save Board Space Internal Precision Reference Saves Space and Cost of ...

Servo click is a 16-channel PWM servo driver with the voltage sensing circuitry. It can be used to simultaneously control 16 servo motors, each with its own programmable PWM signal. The frequency o...

PWR Meter 2 click is a compact and accurate power monitoring Click board™, capable of measuring and monitoring voltage up to 24V and current up to 5A. It carries the MCP3910, an integrated analogue...

PWR Meter click is a power measurement Click board™, capable of measuring voltage and current through the load, connected to either AC or DC power source. PWR Meter click uses the MCP39F511A, a ver...

Compatible Design Upgrade 3D Printers Printers, POS Office and home automation Textile, Sewing Machines CCTV, Security ATM, Cash recycler HVAC2-phase stepper motors up to 2A coil current (peak) STE...

3.3-V, 5-V, 12-V, and Adjustable Output Versions Adjustable Version Output Voltage Range: 1.2-V to 37-V ± 4% Maximum Over Line and Load Conditions Available in TO-220 and TO-263 Packages 3-A Output...

Power, Motor & Robotics Development Tools

Boost LED Regulator Evaluation Board. The MCP1643 Synchronous Boost LED Constant Current Regulator Evaluation Board is developed to help design engineers reduce the product design cycle time. The e...

24V 3-Phase BLDC Motor with Encoder. This Brushless DC (BLDC) motor has a 256-line encoder with index pulse, and can be used with the dsPICDEM MCLV Development Board (DM330021), dsPICDEM MC1L 3-Pha...

MCP16301 Low Noise Evaluation Board. The MCP16301 Low Noise Evaluation Board is used to demonstrate a high voltage input DC-DC converter design. By switching the integrated N-Channel MOSFET at a hi...

The Microchip 62CA4 is the adapter board for 62mm SiC modules controlled by Core Driver 2ACS-17A1HP.Dual-channel Robust High-Noise-Immunity Design Plug & Play for 62mm SiC Modules

The Microchip AgileSwitch 1200V 62MM core adapter board is meant to serve as a quick evaluation tool for designers looking to design in the AgileSwitch 2ASC-12A1HP SiC Driver Core. The combination ...

Power Management Function = Power Over Ethernet (POE) For Use With = PD39210 Kit Classification = Evaluation Module Featured Device = PD39210

Batteries are not included. MCP1642B AA Batteries to USB Power Evaluation Board. The Microchip MCP1642B Battery to USB Power Evaluation board is a platform to demonstrate the capabilities of the MC...

The Microchip ASDAK Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of SiC modules and systems.A...

The Microchip ASDAK Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of SiC modules and systems.A...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

ARM Cortex-M7 core running at 300MHz Double Precision Floating point unit (FPU) for high-precision computing and accelerated data processing High-performance internal memory architecture with user ...

MCP73871 Demonstration Board. The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power pa...

MCP73871 Li-Ion Charger Evaluation Board. The MCP73871 Evaluation Board is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing mana...

MCP1640 Boost Converter Evaluation Board. This evaluation board uses the MCP1640 in a high-efficiency (up to 96%), fixed frequency (500MHz), step-up DC-DC converter Easy-to-use and minimum number o...

MCP1642 High Current Boost Converter Demonstration Board. The Microchip MCP1642 High Current Boost Evaluation Board demonstrates the capabilities of MCP1642B and MCP1642D Boost Converters. These re...

MCP16331 Buck Converter Evaluation Board. The ADM00519 from Microchip is an evaluation board to demonstrate the capabilities of the MCP16331 Step-Down DC-DC converter with two selectable output vol...

The Microchip ADM00860 driver Integrated Circuit (IC) is a sequential linear LED driver, 4-tap version, targeted to provide a flexible solution to drive LEDs from AC line voltages up to 277 VAC and...

MCP39F521 Power Monitor Demonstration Board. The MCP39F521 Power Monitoring Demonstration Board is a fully functional single phase power and energy monitoring system that demonstrates the capabilit...

dsPIC MPLAB® Digital Power Starter Kit. The MPLAB® Digital Power Starter Kit from Microchip introduces and demonstrates the capabilities of the dsPIC33F GS family of Switch-Mode Power Supply (SMPS)...

The Microchip dsPIC33CH512MP506 Digital Power Plug-In Module (DP PIM) is a demonstration board that, in conjunction with different power boards, showcases the Microchip dsPIC33CH512MP506 16-Bit Dig...

The dsPIC33CK256MP506 Digital Power Plug-In Module (DP PIM) is a building block for Microchip’s digital power development boards that allows the controller to be easily swapped out for various dsPI...

Microchip Technology Fan Controller Demo BoardThe Microchip Technology fan controller demo board provides an example of a 12V fan control application using the EMC2305 fan controller and EMC1438 te...

Power Management Function = Evaluation Board For Use With = MCP1501 Kit Classification = Evaluation Kit Featured Device = MCP1501 Kit Name = EV13N91A

Power Management Function = Motor Control For Use With = PIC32MC and PIC32C, PIC32MK Kit Classification = Development Kit Featured Device = MCLV-48V-300W Kit Name = EV18H47A

Power Management Function = Evaluation Board For Use With = MIC24067 Kit Classification = Evaluation Kit Featured Device = MIC24067 EVB Kit Name = EV35G43A

Power Management Function = Evaluation Board For Use With = Evaluation Board Kit Classification = Daughter Board Featured Device = LAN8720A Kit Name = EV46B51A

Power Management Function = Evaluation Board For Use With = MCP1502 Voltage Reference Kit Classification = Evaluation Kit Featured Device = MCP1502 EVB Kit Name = EV55W64A