Power, Motor & Robotics Development Tools (293 items)

The MikroElektronikas L meter click, It is 5V compact and accurate single high-speed voltage comparator, capable of measuring and monitoring. It measure a wide range of inductance. It is compatible...

Charger 2 click is a LiPo/Li-Ion battery charger with the additional monitoring IC onboard. This Click board™ as a whole, offers unpreceded battery charging and monitoring solution for 3.7V LiPo/Li...

Position Sensorless BLDC Drivers (no Hall Sensor required) 180° Sinusoidal Drive for High Efficiency and Low Acoustic Noise Supports 2V to 14V Power Supplies Speed Control through Power Supply Modu...

Brushless 5 click is a 3 phase sensorless BLDC motor controller, with a soft-switching feature for reduced motor noise and EMI, and precise BEMF motor sensing, which eliminates the need for Hall-se...

Eliminates External Components and Reduces Total Cost No Schottky-Synchronous Operation for High Efficiency and Reduced Cost Internal compensation for Stable Operation at Any Output Voltage All Cer...

Reduces External Components and Total Cost No Schottky-Synchronous Operation Internal Compensation for Any Output Voltage Built-In Soft-Start All-Ceramic Capacitors, Compact Layout Reduces Number o...

Factory trimmed AC and DC current sensor analogue ratiometric output voltage Combining sensing element, signal conditioning & isolation in small foot print and low profile SOIC package No applicati...

Boost-INV 2 click is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 15V and inverted to -15V, from a single fixed voltage input. The i...

Output Voltages: 3.2V to 12.775V and –1.2V to –13.95V (LT3582) 5V and –5V (LT3582-5) 12V and –12V (LT3582-12) Digitally Re-Programmable (LT3582) via I2C for: Output Voltages Power Sequencing Output...

Supports up to 20V Output Pull-up Voltage –40°C to 125°C Operating Temperature Range Supports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive Coils Low Output VOL of 0.4V (Typical) W...

H-Bridge 2 click can be used to drive a motor by utilizing a specific configuration of the output stage MOSFETs, known as the H-bridge. This configuration enables H-Bridge 2 click to drive a motor ...

No external sense resistor required, single package solution Reduced power loss: 0.6 mΩ internal conductor resistance on EX package 1.2 mΩ internal conductor resistance on LC package Economical low...

12-bit resolution ± 1 LSB max DNL ± 1 LSB max INL (MCP3204/3208-B ± 2 LSB max INL (MCP3204/3208-C 4 (MCP3204) or 8 (MCP3208) input channels analogue inputs programmable as single-ended or pseudo-di...

Micropower Operating Current (0.9μA typ, 1.7μA max) Preserves Battery Power Tiny 1.11mm x 0.76mm 6-Bump WLP and SOT23 Packages Save Board Space Internal Precision Reference Saves Space and Cost of ...

Servo click is a 16-channel PWM servo driver with the voltage sensing circuitry. It can be used to simultaneously control 16 servo motors, each with its own programmable PWM signal. The frequency o...

PWR Meter 2 click is a compact and accurate power monitoring Click board™, capable of measuring and monitoring voltage up to 24V and current up to 5A. It carries the MCP3910, an integrated analogue...

PWR Meter click is a power measurement Click board™, capable of measuring voltage and current through the load, connected to either AC or DC power source. PWR Meter click uses the MCP39F511A, a ver...

Compatible Design Upgrade 3D Printers Printers, POS Office and home automation Textile, Sewing Machines CCTV, Security ATM, Cash recycler HVAC2-phase stepper motors up to 2A coil current (peak) STE...

3.3-V, 5-V, 12-V, and Adjustable Output Versions Adjustable Version Output Voltage Range: 1.2-V to 37-V ± 4% Maximum Over Line and Load Conditions Available in TO-220 and TO-263 Packages 3-A Output...

Power, Motor & Robotics Development Tools

Boost LED Regulator Evaluation Board. The MCP1643 Synchronous Boost LED Constant Current Regulator Evaluation Board is developed to help design engineers reduce the product design cycle time. The e...

24V 3-Phase BLDC Motor with Encoder. This Brushless DC (BLDC) motor has a 256-line encoder with index pulse, and can be used with the dsPICDEM MCLV Development Board (DM330021), dsPICDEM MC1L 3-Pha...

MCP16301 Low Noise Evaluation Board. The MCP16301 Low Noise Evaluation Board is used to demonstrate a high voltage input DC-DC converter design. By switching the integrated N-Channel MOSFET at a hi...

The Microchip 62CA4 is the adapter board for 62mm SiC modules controlled by Core Driver 2ACS-17A1HP.Dual-channel Robust High-Noise-Immunity Design Plug & Play for 62mm SiC Modules

The Microchip AgileSwitch 1200V 62MM core adapter board is meant to serve as a quick evaluation tool for designers looking to design in the AgileSwitch 2ASC-12A1HP SiC Driver Core. The combination ...

Power Management Function = Power Over Ethernet (POE) For Use With = PD39210 Kit Classification = Evaluation Module Featured Device = PD39210

Batteries are not included. MCP1642B AA Batteries to USB Power Evaluation Board. The Microchip MCP1642B Battery to USB Power Evaluation board is a platform to demonstrate the capabilities of the MC...

The Microchip ASDAK Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of SiC modules and systems.A...

The Microchip ASDAK Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of SiC modules and systems.A...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

The Microchip ASDAK+ Augmented Switching™ Technology Accelerated Development Kit includes the hardware and software elements required to rapidly optimize the performance of the Microchip family of ...

ARM Cortex-M7 core running at 300MHz Double Precision Floating point unit (FPU) for high-precision computing and accelerated data processing High-performance internal memory architecture with user ...

MCP73871 Demonstration Board. The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power pa...

MCP73871 Li-Ion Charger Evaluation Board. The MCP73871 Evaluation Board is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing mana...

MCP1640 Boost Converter Evaluation Board. This evaluation board uses the MCP1640 in a high-efficiency (up to 96%), fixed frequency (500MHz), step-up DC-DC converter Easy-to-use and minimum number o...

MCP1642 High Current Boost Converter Demonstration Board. The Microchip MCP1642 High Current Boost Evaluation Board demonstrates the capabilities of MCP1642B and MCP1642D Boost Converters. These re...

MCP16331 Buck Converter Evaluation Board. The ADM00519 from Microchip is an evaluation board to demonstrate the capabilities of the MCP16331 Step-Down DC-DC converter with two selectable output vol...

The Microchip ADM00860 driver Integrated Circuit (IC) is a sequential linear LED driver, 4-tap version, targeted to provide a flexible solution to drive LEDs from AC line voltages up to 277 VAC and...

MCP39F521 Power Monitor Demonstration Board. The MCP39F521 Power Monitoring Demonstration Board is a fully functional single phase power and energy monitoring system that demonstrates the capabilit...

dsPIC MPLAB® Digital Power Starter Kit. The MPLAB® Digital Power Starter Kit from Microchip introduces and demonstrates the capabilities of the dsPIC33F GS family of Switch-Mode Power Supply (SMPS)...

The Microchip dsPIC33CH512MP506 Digital Power Plug-In Module (DP PIM) is a demonstration board that, in conjunction with different power boards, showcases the Microchip dsPIC33CH512MP506 16-Bit Dig...

The dsPIC33CK256MP506 Digital Power Plug-In Module (DP PIM) is a building block for Microchip’s digital power development boards that allows the controller to be easily swapped out for various dsPI...

Microchip Technology Fan Controller Demo BoardThe Microchip Technology fan controller demo board provides an example of a 12V fan control application using the EMC2305 fan controller and EMC1438 te...

Power Management Function = Evaluation Board For Use With = MCP1501 Kit Classification = Evaluation Kit Featured Device = MCP1501 Kit Name = EV13N91A

Power Management Function = Motor Control For Use With = PIC32MC and PIC32C, PIC32MK Kit Classification = Development Kit Featured Device = MCLV-48V-300W Kit Name = EV18H47A

Power Management Function = Evaluation Board For Use With = MIC24067 Kit Classification = Evaluation Kit Featured Device = MIC24067 EVB Kit Name = EV35G43A

Power Management Function = Evaluation Board For Use With = Evaluation Board Kit Classification = Daughter Board Featured Device = LAN8720A Kit Name = EV46B51A

Power Management Function = Evaluation Board For Use With = MCP1502 Voltage Reference Kit Classification = Evaluation Kit Featured Device = MCP1502 EVB Kit Name = EV55W64A

Power Management Function = Evaluation Board For Use With = MIC24067 Kit Classification = Evaluation Kit Featured Device = MIC24066 EVB Kit Name = EV69G45A

Power Management Function = Evaluation Board For Use With = ATSAML21J18B-MNT SAM MCU Kit Classification = Development Board Featured Device = HV56266 Haptics Eval Kit Kit Name = EV86G67A

Power Management Function = Evaluation Board For Use With = MCP2221A Kit Classification = Evaluation Board Featured Device = PAC1942 Kit Name = EV97L33A

Power Management Function = Evaluation Board For Use With = MCP2221A Kit Classification = Evaluation Board Featured Device = PAC1952 Kit Name = EV99K19A

For Use With = LAN9255 Kit Classification = Evaluation Board Featured Device = Cortex M4F Kit Name = EVB-LAN9255 EtherCAT device controller

MCP402X Non-Volatile Digital Potentiometer Evaluation Board. The MCP402xEV is a low cost evaluation board that quickly enables the user to exercise all of the features of the MCP402X Non-Volatile D...

The Microchip MIC28516 Evaluation Board is used to demonstrate high voltage input Step-Down design, which can deliver up to 95% efficiency to a broad range of output voltages. The board accepts up ...

The Microchip PD70101EVB15F-12 evaluation board provides designers with the needed environment to evaluate the performance and implementation of PD applications based on PD70101 PD-chip. The evalua...

The Microchip PD70101EVB6F evaluation board provides designers with the needed environment to evaluate the performance and implementation of PD applications based on PD70101 PD-chip. The evaluation...

The Microchip PD70101EVB15F-5 evaluation board provides designers with the needed environment to evaluate the performance and implementation of PD applications based on PD70101 PD-chip. The evaluat...

The Microchip PD70201EVB25F-12 evaluation board provides designers with the environment needed for evaluating the performance and implementation of PD applications based on the PD70201 device. The ...

The Microchip PD70201EVB47F evaluation board provides designers with an environment needed to evaluate the performance and implementation of PD applications based on PD70201 device. The board is us...

The Microchip PD70201EVB25F-5 evaluation board provides designers with the environment needed for evaluating the performance and implementation of PD applications based on the PD70201 device. The b...

The Microchip D70201EVB-U-25F-5 board is used for evaluating the performance of the PD70201 device in both standard IEEE 802.3at and non-standard applications with input 17-54 V. The board is a 25 ...

The Microchip PD70211EVB51F-12 evaluation board provides designers with an environment needed for evaluating the performance and implementation of PD applications based on PD70211 controller. The b...

The Microchip PD70211EVB72FW-12 evaluation board provides designers with an environment needed for evaluating the performance and implementation of PD applications based on PD70211 controller. The ...

The Microchip PD70211EVB50FW-5 evaluation board provides designers with an environment needed for evaluating the performance and implementation of PD applications based on PD70211 controller. The b...

The Microchip ADM01007 is a development tools that allows customers to evaluation the function and capabilities of the HV56264. The HV56264 is an automotive version of the industrial amplifier arra...

The Microchip AgileSwitch 1200V dual-channel augmented high performance SiC core 1 enables better control and protection of most SiC MOSFET-based power systems. It provides up to 10A of peak curren...

The Microchip AgileSwitch 1700V dual-channel augmented high performance SiC core 1 enables better control and protection of most SiC MOSFET-based power systems. It provides up to 20A of peak curren...

Power Management Function = Power Module For Use With = PD70201 Kit Classification = Development Board Featured Device = PD70201ILQ

MCP73833 Charge Manager Evaluation Kit. The MCP73833 Li-Ion Battery Charger Evaluation Board contains two circuits for evaluation of various device options. Charge Voltage: 4.20V Programmable Fast ...

MCP73x23 LiFePO4 Battery Charger Evaluation Board. This evaluation board demonstrates the features of the MCP73123 and MCP73223 Lithium Iron Phosphate (LiFePO4) Battery Charge Management Controller...

The Microchip DT100118 is a simple evaluation development tool for the MCP1012 that allows functional evaluation. The MCP1012 is a primary-side controller that starts an off-line Fly back Converter...

The MCP1663 Mini-Module SEPIC Converter Evaluation Board is used to evaluate Microchip Technology’s MCP1663 product. This board demonstrates the capabilities of the MCP1663 SEPIC converter, which h...

The MCP1663 USB programmable power supply reference design was developed to provide a versatile and easy to use solution for engineers. It easily transforms a typical computer’s USB port into a var...

MCP19035 High-Voltage Synchronous Buck Controller Reference Design. This board demonstrates the capabilities of the Microchip MCP19035 600 kHz Synchronous Buck Converter Controller in a typical hig...

For Use With = MCP39F511A Kit Classification = Evaluation Board Featured Device = MCP39F511A Kit Name = MCP39F511A Current Transformer Power Meter

The Microchip MCP6C02 evaluation board demonstrates the performance of Microchip MCP6C02 high-side current sense amplifier. A load is supplied on the board for a convenient demonstration of the eva...

Power Management Function = Buck Controller For Use With = MIC2132 Kit Classification = Evaluation Board Featured Device = MIC2132 Kit Name = MIC2132 Evaluation Board

Power Management Function = Buck Controller For Use With = MIC2133 Kit Classification = Evaluation Board Featured Device = MIC2133 Kit Name = MIC2133 Evaluation Board

Power Management Function = Buck Controller For Use With = MIC21LV32 Kit Classification = Evaluation Board Kit Name = MIC21LV32 4 Phase EVB

The MIC2810 Evaluation Board is used to demonstrate the capabilities of MIC2810 PMIC which can deliver 600mA from a DC/DC buck converter and 300mA from each of the two stand-alone LDOs. The board a...

The Microchip Technology high power boost LED driver is a constant-current boost LED driver which is capable of driving a series switching controller specifically designed to power a string of high...

MIC7401 Evaluation Board was developed to evaluate the capabilities of the MIC7401 Power Management Integrated Circuit (PMIC). The board features 5 DC-DC buck converters capable of delivering 3A ea...

The Microchip Module Adapter Board XM3 - 1200V.Comes in XM3 Type Package

MCP73213 Dual Li-Ion Charger Evaluation Board. This evaluation board demonstrates the features of the MCP73213 Dual-Cell Li-Ion/Li-Polymer Battery Charge Management Controller with Input Overvoltag...

USB type C Power Monitor PAC1934 Quad DC Power and Energy Accumulation Provides information on: Bus voltage, Current, Instantaneous Power consumption, Energy accumulation, CC pins voltage Can be us...

Power Management Function = Power Management For Use With = PAC1944 4 CH HIGH SIDE DC POWER MONITOR Kit Classification = Evaluation Board Featured Device = PAC1944 Kit Name = PAC1944 4 Ch High Side...

The Microchip PD70224EVB evaluation board provides designers with the environment needed for evaluating the performance and implementation of PD applications based on PD70224 and PD70210 devices. T...

The Microchip PD70224EVB with auxiliary power evaluation board provides designers with the environment needed for evaluating the performance and implementation of PD applications based on PD70224 a...

The Microchip PD-IM-7608M-2 evaluation board is developed based on PD69208M PSE manager, PD69200 PSE Controller, PD70224 ideal diode bridge and PD70211 PD IC. It provides a dual input PD-PSE system...

Kit Classification = Module Featured Device = PIC32MK Kit Name = PIC32MK MCA Motor Control PIM

The Microchip plug-in module comes with a 100-Pin PIC32MK1024MCM TQFP device. It enables using internal on-chip OpAmps, or the external OpAmps on the MCLV-2 and MCHV-2 boards. It can be used with t...

Documentation on CD. PICtail™ Plus Buck/Boost Converter Daughter Board. This PICtail™ Plus Daughter Board provides an easy and economical development platform for dsPIC® SMPS and Digital Power Conv...

The Microchip PD-IM-7401 evaluation board provides the designer with the needed environment to evaluate the performance and the implementation of PoE applications based on the PD69101 PoE Manager. ...

The Microchip PD-IM-7504B evaluation board provides designers with the needed environment to evaluate the performance and implementation of PoE and PoE extended mode applications, based on PD69104B...

The Microchip PD-IM-7608M evaluation board is developed based on PD69208M and PD69200 chipsets. PD-IM7608M demonstrates the operation of eight 2-pair ports systems for 4-pair systems, refer to the ...

Power Management Function = Power Over Ethernet (POE) For Use With = PD69201 Kit Classification = Evaluation Module Kit Name = PSE AT

The Microchip PD-IM-7618T4 evaluation board is developed based on PD69208T4 PSE manager and PD69210 controller, and demonstrates the operation of an eight 2-pair port system. The evaluation system ...