Power, Motor & Robotics Development Tools (73 items)

The Pmod DHB1 uses the Texas Instruments® DRV8833 dual H-Bridge motor driver chip to drive two DC motors or a single stepper motor. Each H-Bridge can be driven by GPIO signals.Dual H-Bridge capable...

The Pmod STEP provides a four channel drive for a stepper motor via the ST L293DD. Users may wire two pairs of channels in series to drive up to 600 mA of current per channel and can view the curre...

Pmod HB3 2A H-bridge Driver. The Pmod HB3 features a full H-Bridge driver circuit for driving a brushed DC motor from the system board. Two external pins are provided for optional sensor feedback f...

Pmod CON3 Quad Servomotor Interface. The Pmod CON3 provides a standard 3-pin connector for up to four hobby servo motors. • 4 x standard 3-pin hobby servomotor connectors • System must supply 50Hz ...

Pmod HB5 2A H-bridge Driver. The Pmod HB 5 features a full H-Bridge driver circuit for driving a brushed DC motor from the system board. Functionally identical to the Pmod HB3, it differs in that t...

610mm length of 2.5mm polyvinyl tube. Should only be used to measure dry air pressure. Unsuitable for liquids. Pmod DPG1 Differential Pressure Gauge. The Pmod DPG 1 is a differential pressure gauge...

For Use With = RX23T Kit Classification = Evaluation Board Kit Name = 24V Motor Control Evaluation System for RX23T

Power Management Function = MOSFET Driver Kit Classification = Demonstration Board Kit Name = 3-Phase MOSFET Driver, 80V, 500mA

Power Management Function = Half-Bridge Driver For Use With = ISL2111 Kit Classification = Evaluation Board

The ISL28134 is a single, chopper-stabilized zero drift operational amplifier optimized for single and dual supply operation from 2.25V to 6.0V and ±1.125V and ±3.0V. The ISL28134 uses auto-correct...

Power Management Function = Full Bridge FET Driver Kit Classification = Evaluation Board

ISL9238, Buck-Boost Narrow VDC Battery Charger with SMBus and USB OTG Evaluation Board. The ISL9238EVAL1Z evaluation board demonstrates the performance of the ISL9238. The step up and step down Nar...

ISL94202, 3-to-8 Cell Li-ion Battery Pack Monitor Evaluation Kit, Intersil. The ISL94202EVKIT1Z board enables the evaluation of the ISL94202, a Li-ion Battery Pack Monitor. It supports the charge/d...

The ISL28130, ISL28230 and ISL28430 are single, dual and quad micropower, low offset drift operational amplifiers that are optimized for single and dual supply operation from 1.8V to 5.5V and ±0.9V...

The ISL28134 is a single, chopper-stabilized zero drift operational amplifier optimized for single and dual supply operation from 2.25V to 6.0V and ±1.125V and ±3.0V. The ISL28134 uses auto-correct...