Power, Motor & Robotics Development Tools (9 items)

The Pmod DHB1 uses the Texas Instruments® DRV8833 dual H-Bridge motor driver chip to drive two DC motors or a single stepper motor. Each H-Bridge can be driven by GPIO signals.Dual H-Bridge capable...

The Pmod STEP provides a four channel drive for a stepper motor via the ST L293DD. Users may wire two pairs of channels in series to drive up to 600 mA of current per channel and can view the curre...

Pmod HB3 2A H-bridge Driver. The Pmod HB3 features a full H-Bridge driver circuit for driving a brushed DC motor from the system board. Two external pins are provided for optional sensor feedback f...

Pmod CON3 Quad Servomotor Interface. The Pmod CON3 provides a standard 3-pin connector for up to four hobby servo motors. • 4 x standard 3-pin hobby servomotor connectors • System must supply 50Hz ...

Pmod HB5 2A H-bridge Driver. The Pmod HB 5 features a full H-Bridge driver circuit for driving a brushed DC motor from the system board. Functionally identical to the Pmod HB3, it differs in that t...

610mm length of 2.5mm polyvinyl tube. Should only be used to measure dry air pressure. Unsuitable for liquids. Pmod DPG1 Differential Pressure Gauge. The Pmod DPG 1 is a differential pressure gauge...

The Nordic Semiconductor Power Profiler Kit II Current measurement tool for embedded development. It is a standalone kit that can measure and supply currents as low as 1 uA and as high as 1A on all...

The nPM1100 Evaluation Kit (EK) is a tool for evaluating the nPM1100 Power Management IC and evaluate its features for your application. The kit features switches for all selectable settings, butto...

Power Management Function = Evaluation Kit For Use With = nPM1300 Kit Classification = Evaluation Kit Featured Device = nPM1300 Kit Name = nPM1300 EK