DESCRIPTION A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger FeatherWing: it adds both a battery-backed Real Time Clock and micro SD card storage to a...
DESCRIPTION A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC...
AD5932 Evaluation Board, Analog Devices. The AD5932 is a Programmable Single-Scan Waveform Generator. The Evaluation Board can be used as a stand-alone board, with control coming from an external D...
The Pmod RTCC is a real-time clock/calendar powered by the Microchip® MCP79410. Through the I2C interface, users may configure up to two alarms that can be triggered at a wide variety of possible t...
PICtail™ Plus MCP79410 RTCC Daughter Board. The I²C PICtail daughter board is based around the MCP79410 I²C serial bus Real-Time Clock/Calendar. The board is designed to interface with MCU developm...
The TimeFlash2 programmer allows users to rapidly program Microchip’s field programmable MEMS oscillator to a custom frequency in seconds, minimizing design time by enabling fast prototyping and te...
Click board comes with the header strips soldered. RTC3 click mikroBUS™. RTC3 click is a mikroBUS add-on board for providing Real-Time Clock (RTC) and Calendar information with programmable alarms ...
Click board comes with the header strips soldered. PULSE click mikroBUS™. PULSE click is a mikroBUS add-on board for a pulse generation with an adjustable frequency. It features the NE555 Precision...
Click board comes with the header strips soldered. TIMER click mikroBUS™. TIMER click is a mikroBUS add-on board for recording Elapsed-Time. It features the Maxim DS1682, a Total-Elapsed-Time Recor...
The MikroElektronika RTC -7 click, It has low-current, real-time clock with I2C interface. It is a time-keeping device that provide Nano ampere time keeping current, extending battery life. It supp...
PLL click is a frequency multiplier which uses the Phase-Locked Loop (PLL) techniques to provide a high-frequency clock output from a cheap, standard fundamental mode crystal oscillator. In additio...
Clock Gen 2 click is an accurate square wave generator that can generate a clock signal in the range from 260kHz to 66.6MHz. It generates a square wave in the frequency of 66.6MHz, which is then pr...
Waveform Click is a precise sine/triangle/square waveform generator, capable of reproducing frequencies up to 12MHz. It utilizes a Direct Digital Synthesis (DDS) IC made by Analog Devices, a compan...
Clock/Timer Function = Clock Generator For Use With = Frequency Discriminators, Watchdog Timers Featured Device = 6993, AD5241 - 256 Kit Name = One Shot Click
The MikroElektronika Clock Gen 3 Click features a low power self-contained digital frequency source providing a precision frequency from 1kHz to 68MHz, set through a serial port. This Click board™,...
The MikroElektronika clock gen 4 click compact add on board that contains both a clock generator and a multiplier or jitter reduced clock frequency synthesizer. It is suitable for MCU clock source ...
Clock/Timer Function = System Timer Kit Classification = Sensor Add-On Board For Use With = Countdown Timer Featured Device = TPS3430 Kit Name = Watchdog Click
Clock/Timer Function = Clock or Data Translator Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = Time to Digital Converter Kit Name = TDC Click
Clock/Timer Function = DDS Waveform Generator Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = SRAM, Waveform Generator Kit Name = Waveform 4 Click
Clock/Timer Function = Real Time Clock (RTC) Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = BU9873 Kit Name = RTC 16 Click
The Renesas Electronics evaluation board for the IDT 5P49V6965 VersaClock 6E programmable clock generator. With RMS phase jitter of less than 0.5ps over the full 12kHz to 20MHz integration range, t...
Clock/Timer Function = Clock Generator Kit Classification = Evaluation Board For Use With = VersaClock 5P49V6968 Kit Name = Evaluation Board for 5P49V6968 VersaClock 6E
Clock/Timer Function = Clock Generator Kit Classification = Evaluation Board For Use With = 8V97003 RF/Microwave Wideband Synthesizer Kit Name = 8V97003 EVB
Clock/Timer Function = Clock Generator Kit Classification = Development Kit For Use With = 5P35021 VersaClock 3S device Kit Name = VersaClock 3S Family Development Kit
Clock/Timer Function = Clock Generator Kit Classification = Development Kit For Use With = 5P35021 VersaClock 3S device Kit Name = VersaClock 3S Family Development Kit
The Renesas Electronics RC32504A evaluation board (EVB) is designed to help users evaluate the RC32504A and RC22504A Clock Generators, also known as FemtoClock 2. It supports Jitter Attenuator and ...
Clock/Timer Function = Clock Synthesiser Kit Classification = Evaluation Kit For Use With = PC Featured Device = RC32614A Kit Name = Evaluation Kit For RC32614A ClockMatrix
The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hour...
Evaluation Board for Si5347 Clock Multiplier, Silicon Laboratories. The Si5347-EVB evaluation board is designed to evaluate the Si5347 Jitter Attenuating Clock Multiplier allowing for a smooth tran...
ClockBuilder Pro Field Programmer. The ClockBuilder Pro Field Programmer when used with ClockBuilder Pro software, makes it simple for systems designers to develop, program and debug any Si534x or ...
Evaluation Board for Si5317 Jitter Cleaning Clock. The Si5317-EVB is intended for evaluating the high-performance Si5317, 1:1 jitter-attenuating clock cleaner. Third generation DSPLL technology pro...
Based on Silicon Labs proprietary MultiSynth™ flexible frequency synthesis technology, the Si5332 generates any combination of output frequencies with excellent jitter performance (230 fs rms). The...
Evaluation Board for Si533x Clock Generator/Buffer. Silicon Lab evaluation board Si5338-EVB will assess all of the following Si5330/34/35/38 series of any frequency and any output quad clock genera...
Programming Kit for Si5338/Si5356 Clock Generator/Buffer. The silicon labs clock generator / clock buffer Si5338/Si5356 Field Programming Kit lets the user write a new configuration file to the one...
Evaluation Board for Si5356 Clock Generator. The Si5356-EVB will evaluate any I2C programmable Si5356 clock generator with frequencies covering 1 to 200MHz.. Quad frequency, eight output clock gene...
Evaluation Board for Si5350/Si5351 Clock Generator. Silicon laboratories Si535x-B20QFN-EVB evaluation circuit board will evaluate any frequency programmable CMOS clock generator Si5350 and Si5351 s...
Time Stick,Timing Tool for Si5350 Clock Generator. Silicon labs Si535x-TMSTK gives the user a development tool for CMOS clock generators. The Clock generator Si5350 and Si5351 USB timing Tool Stick...
ClockBuilder Pro Field Programmer. The ClockBuilder Pro Field Programmer when used with ClockBuilder Pro software, makes it simple for systems designers to develop, program and debug any Si534x or ...
Evaluation Board for Si5XX-PROG-EVB Any Frequency XO. The Silicon Laboratories Si5XX-PROG-EVB circuit board evaluates any frequency I2C programmable crystal oscillators/Voltage control crystal osci...
BeagleBone PRU Cape. The BeagelBone PRU Cape is an add-on board that allows users to evaluate the Programmable Real-Time Units (PRU) of the BeagleBone's processor. The PRU is a low-latency microcon...
BeagleBone PRU Cape. The BeagelBone PRU Cape is an add-on board that allows users to evaluate the Programmable Real-Time Units (PRU) of the BeagleBone's processor. The PRU is a low-latency microcon...
Clock/Timer Function = System Timer Kit Classification = Evaluation Board For Use With = TPL5010 Featured Device = TPL5010 Kit Name = Evaluation Module