Clock & Timer Development Tools (47 items)

Clock/Timer Function = System Timer Kit Classification = Sensor Add-On Board For Use With = Countdown Timer Featured Device = TPS3430 Kit Name = Watchdog Click

The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hour...

Clock/Timer Function = Real Time Clock (RTC) Kit Classification = Module For Use With = Micro:bit and Arduino

DESCRIPTION A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger FeatherWing: it adds both a battery-backed Real Time Clock and micro SD card storage to a...

Clock/Timer Function = Real Time Clock (RTC) Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = BU9873 Kit Name = RTC 16 Click

Clock/Timer Function = Clock Generator Kit Classification = Add On Board For Use With = MCU Featured Device = LTC6903 Kit Name = Clock Gen 5 Click

Clock/Timer Function = Clock or Data Translator Kit Classification = Add On Board For Use With = mikroBUS socket Featured Device = Time to Digital Converter Kit Name = TDC Click

The Pmod RTCC is a real-time clock/calendar powered by the Microchip® MCP79410. Through the I2C interface, users may configure up to two alarms that can be triggered at a wide variety of possible t...

DESCRIPTION A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC...

PLL click is a frequency multiplier which uses the Phase-Locked Loop (PLL) techniques to provide a high-frequency clock output from a cheap, standard fundamental mode crystal oscillator. In additio...

The MikroElektronika Clock Gen 3 Click features a low power self-contained digital frequency source providing a precision frequency from 1kHz to 68MHz, set through a serial port. This Click board™,...

The MikroElektronika RTC -7 click, It has low-current, real-time clock with I2C interface. It is a time-keeping device that provide Nano ampere time keeping current, extending battery life. It supp...

Click board comes with the header strips soldered. TIMER click mikroBUS™. TIMER click is a mikroBUS add-on board for recording Elapsed-Time. It features the Maxim DS1682, a Total-Elapsed-Time Recor...

Clock Gen 2 click is an accurate square wave generator that can generate a clock signal in the range from 260kHz to 66.6MHz. It generates a square wave in the frequency of 66.6MHz, which is then pr...

Click board comes with the header strips soldered. RTC3 click mikroBUS™. RTC3 click is a mikroBUS add-on board for providing Real-Time Clock (RTC) and Calendar information with programmable alarms ...