Manifold Bases, Sub-Bases & End Bases (704 items)

Whilst generally considered a safe source of energy, Compressed Air must always be treated with caution and under no circumstances be used for any other purposes than that for which it is intended....

Whilst generally considered a safe source of energy, compressed air must always be treated with caution and under no circumstances be used for any other purposes than that for which it is intended....

Whilst generally considered a safe source of energy, compressed air must always be treated with caution and under no circumstances be used for any other purposes than that for which it is intended....

Whilst generally considered a safe source of energy, Compressed Air must always be treated with caution and under no circumstances be used for any other purposes than that for which it is intended....

End-base pair for interface, intrinsic safety. End-base kit for pneumatic exhaust power supply and return for mini-distributors. Compatible fluids: neutral air and gases. Attachment between sub-bas...

Crouzet Sub-baseThe Crouzet 81 series sub-base is used for mounting logic elements in pneumatic control systems. This base has provision for mounting components like a 2-hand start module, leak sen...

Rear Connecting Base for Logic Elements ; Relays (Rail Mounting). Rear connecting sub base to which modular logic elements are mounted using 2 screws. Fitted with clips for 8mm dia. mounting rails....

Front Connecting Base ; Additional Base for Logic Elements ; Relays. Front Connecting Base for use independently or joined with an additional sub-base (619-5205) to create a manifold of bases. Swiv...

Manufacturer Series = 81 Type = Sub Base

Connection Port Thread = Push In 4 mm Type = Sub-Base For Use With = Logic Elements

Connection Port Thread = Push In 4 mm Type = Sub Base For Use With = Logic Elements

Manifold Bases, Sub-Bases & End Bases

Manufacturer Series = SY7000 Power Consumption = 350mW Number of Stations = 4 stations

Number of Stations = 1 Connection Port Thread = G 1/8 Manufacturer Series = 307 Type = Pilot Valve Body Material = Stainless Steel For Use With = 881307

Asco Solenoid Coils. Asco ‘s solenoid coil is predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic flu...

Asco Solenoid Coils. Asco ‘s solenoid coil is predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic flu...

ISO 5599 manifolds. Range of bases for ISO distributors, sizes 1, 2 and 3.

ISO 5599 manifolds. Range of bases for ISO distributors, sizes 1, 2 and 3.

ISO 5599 manifolds. Range of bases for ISO distributors, sizes 1, 2 and 3.

ISO 5599 manifolds. Range of bases for ISO distributors, sizes 1, 2 and 3.

Sockets and accessories for series 519-520-521 valves. Sockets:. Light alloy sockets for 519, 520, 521 series distributors. Connection to extremities of the socket via 3threaded holes. Pressure mus...

Sockets and accessories for series 519-520-521 valves. Sockets:. Light alloy sockets for 519, 520, 521 series distributors. Connection to extremities of the socket via 3threaded holes. Pressure mus...

Sockets and accessories for series 519-520-521 valves. Sockets:. Light alloy sockets for 519, 520, 521 series distributors. Connection to extremities of the socket via 3threaded holes. Pressure mus...

Number of Stations = 1 Connection Port Thread = G 1/4 Type = C1 Body Material = Aluminium For Use With = CD01

Number of Stations = 1 Connection Port Thread = G 1/4 Type = C2 Body Material = Aluminium For Use With = CD01

Manufacturer Series = 840 Body Material = Polyamide For Use With = 840

This component is used on mounting frames, as a manifold, or accumulator and as an additional reservoir for timers

This component is used on mounting frames, as a manifold, or accumulator and as an additional reservoir for timers

This component is used on mounting frames, as a manifold, or accumulator and as an additional reservoir for timers

Festo Distributor Block, G 1/2 - FR Series - FR-8-1/4 This distributor block from Festo is used to divert a single compressed-air feed line to multiple devices. It has eight outlets and eliminates ...

Festo Distributor BlockThe Festo FR-8 series aluminium die cast distributor block has port connections of 1/2, 3/4 and a thread standard is G. It has 8 number of output ports and a single supply li...

Festo Distributor Block - FR-8-1/8Compressed air branching in block design. • Aluminum • 8 connections • Operating medium compressed air, vacuum

The Festo MH1 manifold block has a two M3 and M5 threaded valve positions with plug base. The operating pressure ranges between 0 bar and 8 bar.CRC type = 1 ( low corrosion stress)

The Festo MH1 manifold block has a four M3 and M5 threaded valve positions without plug base for printed circuit board. The operating pressure ranges between 0 bar and 8 bar.CRC type = 2 ( moderate...

The Festo MH1 manifold block has a four M3 and M5 threaded valve positions with plug base. The operating pressure ranges between 0 bar and 8 bar.CRC type = 1 ( low corrosion stress)

The Festo Sub-bases is used for manifold block valves MH1 with plug connection underneath. It has a pneumatic port connection of M3. The operating pressure ranges between 0.9 bar and 12 bar.CRC typ...

The Festo Sub-bases is used for manifold block valves MH1 with plug connection at rear, plug connection on top. It has a pneumatic port connection of M3. The operating pressure ranges between 0.9 b...

The Festo Sub-bases is used for manifold block valves MH2 with plug connection at rear, plug connection on top. It has a pneumatic port connection of M5. The operating pressure ranges between 0.9 b...

Number of Stations = 10 Connection Port Thread = G 1/4, G 1/8 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP3

Number of Stations = 10 Connection Port Thread = G 1/4, G 3/8 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP4

Number of Stations = 10 Connection Port Thread = M5, M7 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHA2

Number of Stations = 6 Connection Port Thread = G 1/4, G 3/8 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP4

Number of Stations = 8 Connection Port Thread = G 1/4, G 3/8 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP3

Number of Stations = 8 Connection Port Thread = G 1/4, G 3/8 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP4

Number of Stations = 8 Connection Port Thread = M5, M7 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHA2

The Festo individual sub-base MHA1-AS-3-M3 for manifold block valves MHA1-..-HC/TC. It has Operating pressure 0 - 8 bar and Corrosion resistance classification CRC 2 - Moderate corrosion stress.Amb...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 2 which using internal thread of valve method. Its pneumatic connection port2 is metric M5 ...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 4 which using internal thread method. Its pneumatic connection port2 is metric M5Free of co...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 8 which using internal thread method. Its pneumatic connection port2 is metric M5Free of co...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 4 which using internal thread of valve method. Its pneumatic connection port2 is metric M5 ...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 6 which using internal thread of valve method. Its pneumatic connection port2 is metric M5 ...

The Festo MHA2 series of sub base used for manifold block valve has through hole mounting type which using internal thread of valve method. Its pneumatic connection port1 is metric M5 and product w...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 10 which using internal thread method. Its pneumatic connection port2 is metric M5Free of c...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 2 which using internal thread method. Its pneumatic connection port2 is metric M5Free of co...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 6 which using internal thread method. Its pneumatic connection port2 is metric M5Free of co...

The Festo manifold block MHA3-PR6-3-1/8 for manifold block valves MHA3-..-HC/TC. It has maximum number of valve positions 6.Corrosion resistance classification CRC 2 - Moderate corrosion stress Mou...

The Festo MHA3 series of sub-base used for manifold block valve with through hole mounting type and using internal thread of valve method. Its pneumatic connection port2 is G1/82 - moderate corrosi...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 4 which using internal thread method. Its pneumatic connection port1/33 is G1/4Free of copp...

The Festo MHA2 series of manifold block has through hole mounting type with maximum number valve position 2 which using internal thread method. Its pneumatic connection port1/33 is G1/4Free of copp...

The Festo MHA2 series of sub-base has through hole mounting type with maximum number valve position 4 which using internal thread method. Its pneumatic connection port1/33 is G1/4 and the overall p...

The Festo MHA2 series of manifold block has through hole with top-hat rail mounting type with maximum number valve position 2 which using internal thread method. Its pneumatic connection port1/33 i...

The Festo MHA2 series of manifold block has through hole with top-hat rail mounting type with maximum number valve position 4 which using internal thread method. Its pneumatic connection port1/33 i...

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 4 and has through hole mounting type which using internal thread method. Its pneumatic conne...

The Festo MHP1 series of individual sub-base used for semi in-line valve which has pneumatic connection port1 is M3 and operating pressure up to 0.9- 2 bar.Ambient temperature 0 to 50 °C

The Festo MHP1 series of individual sub-base used for semi in-line valve which has pneumatic connection port1 is M3 and operating pressure up to 0 - 8 bar.Ambient temperature 0 to 50 °C

Number of Stations = 10 Connection Port Thread = M7 Manufacturer Series = MHP2 Type = Manifold Block Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP2

Number of Stations = 2 Connection Port Thread = M7 Manufacturer Series = MHP2 Type = Manifold Block Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP2

Number of Stations = 4 Connection Port Thread = M7 Manufacturer Series = MHP2 Type = Manifold Block Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP2

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 10 and has through hole mounting type which using internal thread method. Its pneumatic conn...

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 4 and has through hole mounting type which using internal thread method. Its pneumatic conne...

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 6 and has through hole mounting type which using internal thread method. Its pneumatic conne...

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 2 and has through hole mounting type which using internal thread method. Its pneumatic conne...

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 6 and has through hole mounting type which using internal thread method. Its pneumatic conne...

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 8 and has through hole mounting type which using internal thread method. Its pneumatic conne...

The Festo MHP1 series of manifold block used for semi in-line valve which used maximum valve position is 8 and has through hole mounting type which using internal thread method. Its pneumatic conne...

Number of Stations = 5 Connection Port Thread = G 1/4, G 1/8 Manufacturer Series = NAS Type = Sub Base Body Material = Aluminium Thread Size = 1/4 in, 1/8in Thread Standard = G Electrical Connectio...

NAS Series Individual Sub-bases. Festo NAS Series Sub bases for individual mounting and installation of pneumatic control valves. NAS bases are manufactured from die-cast aluminium with a port patt...

Number of Stations = 5 Connection Port Thread = G 1/8, Metric M5 Manufacturer Series = NAS Type = Sub Base Body Material = Aluminium Thread Size = 1/8 in, M5 Thread Standard = G, Metric Electrical ...

The Festo NAS series sub base for individual mounting and installation of pneumatic control valve. The individual sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 5...

The Festo NAS series sub base for individual mounting and installation of pneumatic control valve. The individual sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 5...

The Festo NAS series sub base for individual mounting and installation of pneumatic control valve. The individual sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 5...

NAU Series Manifold Sub-bases. Festo NAU Series Sub bases for individual mounting and installation of pneumatic control valves. NAU bases are manufactured from die-cast aluminium with a port patter...

The Festo NAU series sub base for individual mounting and installation of pneumatic control valve. The individual sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 5...

The Festo NAU series sub base for individual mounting and installation of pneumatic control valve. The individual sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 5...

The Festo NAU series sub base for individual mounting and installation of pneumatic control valve. The individual sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 5...

The Festo NAV series sub base for individual mounting and installation of pneumatic control valve. The manifold sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 559...

The Festo NAV series sub base for individual mounting and installation of pneumatic control valve. The manifold sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 559...

The Festo NAV series sub base for individual mounting and installation of pneumatic control valve. The manifold sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 559...

The Festo NAV series sub base for individual mounting and installation of pneumatic control valve. The manifold sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 559...

NAV Series Manifold Sub-base. Festo NAV Series Sub bases for individual mounting and installation of pneumatic control valves. NAV bases are manufactured from die-cast aluminium with a port pattern...

The Festo NAV series sub base for individual mounting and installation of pneumatic control valve. The manifold sub-base are manufactured from die-cast aluminium with a port pattern to suit ISO 559...

NAW Series Manifold Sub-bases. Festo NAV Series Sub bases for individual mounting and installation of pneumatic control valves. NAV bases are manufactured from die-cast aluminium with a port patter...

NAW Series Manifold Sub-bases. Festo NAV Series Sub bases for individual mounting and installation of pneumatic control valves. NAV bases are manufactured from die-cast aluminium with a port patter...

The Festo NAW series of manifold sub-base has only connection at side which is based on standard ISO 15407-1 and its width size is 26mm and used aluminium die cast material for connecting plate.Pro...

The Festo 90° connection plate used aluminium die cast material for connecting plate and it is only connected at side. The pneumatic connection port 2 is G1/4Free of copper and PTFE

The Festo NAW series of manifold sub-base has only connection at side which is based on standard ISO 15407-1 and its width size is 18mm and used aluminium die cast material for connecting plate.Pro...

The Festo blanking plate NDV-02-VDMA For sub-bases. It has operating medium Compressed air in accordance with ISO8573-1:2010 [7:4:4], Note on operating and pilot medium Lubricated operation possibl...

The Festo NAW series of blanking plate used for sub-base which used POM material for connecting plate.Product weight 36 g Free of copper and PTFE

NEV Series Manifold End-plate Kits. End plate kits for assembling pneumatic valve sub-bases into manifold assemblies. The kit contains both of the required end plates. Suitable for use with control...

NEV Series Manifold End-plate Kits. End plate kits for assembling pneumatic valve sub-bases into manifold assemblies. The kit contains both of the required end plates. Suitable for use with control...