Manifold Bases, Sub-Bases & End Bases (566 items)

This component is used on mounting frames, as a manifold, or accumulator and as an additional reservoir for timers

This component is used on mounting frames, as a manifold, or accumulator and as an additional reservoir for timers

This component is used on mounting frames, as a manifold, or accumulator and as an additional reservoir for timers

Festo Distributor Block, G 1/2 - FR Series - FR-8-1/4 This distributor block from Festo is used to divert a single compressed-air feed line to multiple devices. It has eight outlets and eliminates ...

Festo Distributor BlockThe Festo FR-8 series aluminium die cast distributor block has port connections of 1/2, 3/4 and a thread standard is G. It has 8 number of output ports and a single supply li...

Festo Distributor Block - FR-8-1/8Compressed air branching in block design. • Aluminum • 8 connections • Operating medium compressed air, vacuum

The Festo MH1 manifold block has a two M3 and M5 threaded valve positions with plug base. The operating pressure ranges between 0 bar and 8 bar.CRC type = 1 ( low corrosion stress)

The Festo MH1 manifold block has a four M3 and M5 threaded valve positions without plug base for printed circuit board. The operating pressure ranges between 0 bar and 8 bar.CRC type = 2 ( moderate...

The Festo MH1 manifold block has a four M3 and M5 threaded valve positions with plug base. The operating pressure ranges between 0 bar and 8 bar.CRC type = 1 ( low corrosion stress)

The Festo Sub-bases is used for manifold block valves MH1 with plug connection underneath. It has a pneumatic port connection of M3. The operating pressure ranges between 0.9 bar and 12 bar.CRC typ...

The Festo Sub-bases is used for manifold block valves MH1 with plug connection at rear, plug connection on top. It has a pneumatic port connection of M3. The operating pressure ranges between 0.9 b...

The Festo Sub-bases is used for manifold block valves MH2 with plug connection at rear, plug connection on top. It has a pneumatic port connection of M5. The operating pressure ranges between 0.9 b...

Number of Stations = 10 Connection Port Thread = G 1/4, G 1/8 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP3

Number of Stations = 10 Connection Port Thread = G 1/4, G 3/8 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHP4

Number of Stations = 10 Connection Port Thread = M5, M7 Manufacturer Series = MHA Type = Manifold Body Material = Aluminium Alloy For Use With = Solenoid Valve MHA2