Rope Pull Switches (181 items)

Normal State Configuration = 4NO/4NC Cable Length = 250m

Normal State Configuration = 4NC/2NO Cable Length = 125m Mounting Orientation = Left Side

Normal State Configuration = 4NC/2NO Cable Length = 125m Mounting Orientation = Right Side

Honeywell 2CPS Cable Pull Safety Switches. The 2CPS cable pull safety switch range is suitable for covering long distances by allowing the user to run a cable in opposite directions from the unit. ...

Normal State Configuration = 4NO/4NC Cable Length = 250m

Normal State Configuration = 2NO/2NC Cable Length = 100m

Honeywell 2CPS Cable Pull Safety Switches. The 2CPS cable pull safety switch range is suitable for covering long distances by allowing the user to run a cable in opposite directions from the unit. ...

Normal State Configuration = 3NO/3NC Cable Length = 50m Mounting Orientation = Vertical IP Rating = IP65 Series = EX-T3Z 068

Normal State Configuration = 4NC/2NO Cable Length = 125m Mounting Orientation = Left Side

Normal State Configuration = 4NC/2NO Cable Length = 125m Mounting Orientation = Right Side

Normal State Configuration = 2NO/2NC Cable Length = 50m Mounting Orientation = Dual Direction IP Rating = IP65 Series = EX-T3Z

Normal State Configuration = 1NC/1NO Cable Length = 50m Mounting Orientation = Dual Direction IP Rating = IP65 Series = EX-T3Z

Normal State Configuration = 1NC/1NO Cable Length = 50m Mounting Orientation = Screw IP Rating = IP65 Series = 3SE7

Normal State Configuration = 2NO/2NC Cable Length = 80m

To comply with safety standards, a switch unit should be fitted at each end of the grab wire to afford system and operator protection. Our rope switch kits contain all fittings necessary for instal...

Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths. Stock No typ ; 239-6757 239-6757. GWN Series, Grab Wire. Designed to offer...

Honeywell 1CPS Cable Pull Safety Switches. The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 mete...

The Omron Safety rope pull E-stop switch has 4 N/C + 2 N/O contacts with Included (24 VDC) Indicator Beacon. Typical applications are on conveyor systems and across rotating machinery, and around h...

ER Series Rope Pull Emergency Stop Switch. The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage sp...

The Siemens 3SE7 is a Conveyor belt unbalance tracker Metal enclosure. WITH latching according to EN ISO 13850 Pushbutton released.It has ip rating of IP67. Degree of pollutiom is class 3.

Normal State Configuration = 2NO/2NC Mounting Orientation = Dual Direction Series = EX-T. 454

EN/ISO 13850:2006. The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which th...

Normal State Configuration = 3NC/1NO Cable Length = 75m Mounting Orientation = Screw IP Rating = IP67 Series = 3SE7

ER Series Rope Pull Emergency Stop Switch. The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage sp...

Normal State Configuration = 2NO/2NC Cable Length = 50m

Telemecanique XY2CE EX ATEX Emergency Stop Rope Pull Switches. Telemecanique XY2CE EX ATEX emergency stop rope pull switches are designed to reduce the risk of injury to persons and damage either t...

Normal State Configuration = 1NO/1NC Cable Length = 50m Mounting Orientation = Screw IP Rating = IP54 Series = 3SE7

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db. IEC, IECEx, Ex, ATEX. IDEM Guardian Line Expl...

Normal State Configuration = 2NO/2NC Mounting Orientation = Dual Direction Series = EX-T. 454

Normal State Configuration = 4NC Cable Length = 75m Mounting Orientation = Vertical IP Rating = IP67 Series = EX-ZQ 900

Honeywell 1CPS Cable Pull Safety Switches. The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 mete...

Normal State Configuration = 3NC/1NO Cable Length = 75m Mounting Orientation = Vertical IP Rating = IP67 Series = EX-ZQ 900

Telemecanique XY2CE EX ATEX Emergency Stop Rope Pull Switches. Telemecanique XY2CE EX ATEX emergency stop rope pull switches are designed to reduce the risk of injury to persons and damage either t...

Normal State Configuration = 2NC, 2NO Cable Length = 75m Mounting Orientation = Vertical IP Rating = IP67 Series = EX-ZQ 900

Telemecanique XY2CE EX ATEX Emergency Stop Rope Pull Switches. Telemecanique XY2CE EX ATEX emergency stop rope pull switches are designed to reduce the risk of injury to persons and damage either t...

Normal State Configuration = 2NC Cable Length = 75m Mounting Orientation = Vertical IP Rating = IP67 Series = EX-ZQ 900

Normal State Configuration = NO/NC Cable Length = 75m Mounting Orientation = Straight IP Rating = IP67 Series = EX-ZQ900

Cable-operated switch, Metal enclosure, 2 x M20 x 1,5; 1NO+1NC, with latching and button reset, with LED lamp red

Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths. Stock No typ ; 239-6757 239-6757. GWN Series, Grab Wire. Designed to offer...

UL,CSA. The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable...

Telemecanique Sensors Wire SwitchThe Telemecanique sensors XY2CE is 240VAC rated voltage wire switch. It has E-stop rope pull switch on left side-2NC+2NO with yellow pilot light, 230V-boot.Features...

IDEM Rope Pull SwitchThe IDEM GLS-Ex safety rope pull switch has 2NC/2NO contact configuration. It is designed to be mounted on machines and sections of conveyors which cannot be protected by guard...

Telemecanique Sensors Wire SwitchThe Telemecanique sensors XY2CE is 240VAC voltage wire switch. It has E-stop rope pull switch on right side-2NC+2NO with yellow pilot light, 230V-boot.Features and ...

Normal State Configuration = 1NO/1NC Cable Length = 20m Mounting Orientation = Screw IP Rating = IP65 Series = 3SE7

E-stop rope pull switch XY2CE - RH side -1NC+1NO - booted pushbutton

ER Series Rope Pull Emergency Stop Switch. The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage sp...

IDEM Rope Pull SwitchThe IDEM GLS-SS series emergency stop rope pull cable switch has 2NO/2NC contact configuration. It is compact, robust yellow and has stainless steel housing that protects short...

Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths. Stock No typ ; 239-6757 239-6757. GWN Series, Grab Wire. Designed to offer...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. Stock nos. ; 123-7515 123-7515 , ; 123-7517 123-7517 ; ; 123-7518 123-7518 have an E-stop. Stock no...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db. IEC, IECEx, Ex, ATEX. IDEM Guardian Line Expl...

EN/ISO 13850:2006. The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which th...

The Omron Safety rope pull E-stop switch has 2 N/C + 1 N/O contacts with Included (24 VDC) Indicator Beacon. Typical applications are on conveyor systems and across rotating machinery, and around h...

The Omron ER6022 series is a Safety rope pull E-stop switch has 2 NC+1 NO contacts with Included (24 VDC) Indicator Beacon. Typical applications are on conveyor systems and across rotating machiner...

Turck RP Series Rope Pull Switch. The RP series of rope pull switches are robustly built with a premium finish and are designed to be used in a wide variety of installations. Various spans availabl...

UL Listed file number: E164353 CCN NKCR. CSA certified file number: LR44087 class 3211 03. CE marked. Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version. Tel...

IDEM Rope Pull SwitchThe IDEM GLS-SS series emergency stop rope pull cable switch has 2NO/2NC contact configuration. It is compact, robust yellow and has stainless steel housing that protects short...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. Stock nos. ; 123-7515 123-7515 , ; 123-7517 123-7517 ; ; 123-7518 123-7518 have an E-stop. Stock no...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. Stock nos. ; 123-7515 123-7515 , ; 123-7517 123-7517 ; ; 123-7518 123-7518 have an E-stop. Stock no...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. Stock nos. ; 123-7515 123-7515 , ; 123-7517 123-7517 ; ; 123-7518 123-7518 have an E-stop. Stock no...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. ; 826-4108 826-4108 has an LED, ; 826-4117 826-4117 has an E-stop, ; 826-4110 826-4110 has LED and ...

ER Series Rope Pull Emergency Stop Switch. The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage sp...

The Omron ER series rope pull emergency stop switch is made from die cast aluminium alloy are designed to be used mainly on conveyor systems, across rotating machinery and around hazardous areas. D...

The Schneider Electric XY2CH Emergency Stop Rope pull Switch is designed with a right hand side or a left hand side anchor point, allowing operator to trigger the stop of potentially dangerous mach...

ER Series Rope Pull Emergency Stop Switch. The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage sp...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. Stock nos. ; 123-7515 123-7515 , ; 123-7517 123-7517 ; ; 123-7518 123-7518 have an E-stop. Stock no...

EN418; IEC947-5-5. Cable Pull System SR-U2Z 300 / 175 / 100. Maximum system length: 75 m Switch function: 2 NC + 2 NO (standard) Built-in reset button Cable pull eyelet, low cost Visualisation of c...

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. Stock nos. ; 123-7515 123-7515 , ; 123-7517 123-7517 ; ; 123-7518 123-7518 have an E-stop. Stock no...

EN418; IEC947-5-5. Cable Pull System SR-U2Z 300 / 175 / 100. Maximum system length: 75 m Switch function: 2 NC + 2 NO (standard) Built-in reset button Cable pull eyelet, low cost Visualisation of c...

Normal State Configuration = 2NC Cable Length = = 75m IP Rating = IP65 Series = i150 Length = 203mm Width = 69mm Depth = 85mm Housing Material = Metal Maximum Operating Temperature = +80°C

PSEN Safety Rope Pull Switch. The PSENrope from Pilz is a manually operated rope pull switch used to safely shut down functional processes that extend over a wide area, such as conveyors. It provid...