Signal Conditioners (167 items)

Signal Conditioners

Signal Conditioners

Inverter module. The inverter module inverts the signals of ground switching n-p-n transistor outputs into plus switching p-n-p outputs, and vice versa.

Module Type = Isolation Amplifier Input Signal Type = Current Output Signal Type = Current Input Range = -50 → 200°C Supply Voltage = 19.2 → 30V dc Hazardous Area Certification = ATEX Mounting Type...

Module Type = Isolation Amplifier Input Signal Type = Voltage Output Signal Type = Voltage Supply Voltage = 19.2 → 30V dc Mounting Type = DIN Rail Operating Temperature Range = -20 → +65°C Series =...

Module Type = Isolation Amplifier Input Signal Type = Current Output Signal Type = Voltage Input Range = 4 → 20mA Output Range = 0 → 10V dc Supply Voltage = 24V dc Mounting Type = DIN Rail Mount Op...

4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration

II 3 G Ex nA II T4 X. 3-line MINI MCR converter/insulators. Modules that provide triple voltage insulation and conversion of analogue signals. Low absorbed power, low heat and longer operating life...

FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (mult...

FO converter with integrated optical diagnostics, alarm contact, for RS-232 interfaces up to 115.2 kbps, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (multimode)

Modular repeater for electrical isolation and range increase for PROFIBUS up to 12 Mbps, 4-way isolation, rail-mountable, supply 24 V DC

PLC Interface Relays. A series of PLC Interface relays from Phoenix contact. A durable build ensures perfect connection with your application. All models are highly reliable and excellent quality. ...

II 3 G Ex nA II T4 X. Temperature converters configurable for PT100. Converters for Pt 100 probe dip switch adjustment assembly. 0 to 10 V output or 0 (4) at 20 mA. Voltage insulation from external...

Ex-i Solenoid Driver. For controlling Ex-i solenoid valves, alarm modules or LEDs installed in Ex areas Current limitation at 48 mA For gases up to Group II C, loop-powered, electrical isolation, S...

EN 61326, ATEX II (1) GD [Ex ia] IIC, Ex II 3 G Ex nAC IIC T4 X, [Ex ia] IIC; [Ex iaD]; Ex nAC IIC T4 X, SIL 2 according to EN 61508, CUL Listed, UL Listed, IECEx, UL-EX LIS / CUL-EX LIS. CE-compli...

Module Type = Isolation Amplifier Input Signal Type = NAMUR Sensor, Switch Output Signal Type = Relay Supply Voltage = 19.2 → 30V dc Hazardous Area Certification = ATEX Mounting Type = DIN Rail Ope...

EN 61326, ATEX II (1) GD [Ex ia] IIC, [Ex ia] IIC; [Ex iaD]; Ex nA II T4 X, SIL 2 according to EN 61508, CUL Listed, UL Listed, IECEx, UL-EX LIS / CUL-EX LIS. CE-compliant. Ex-i NAMUR Isolating Amp...

Ex i measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active 0/4…20 mA electrically isolated signals from the Ex area to two loads in the safe...

The configurable frequency transducer is suitable for the connection of NAMUR proximity sensors as well as for sensors with NPN and PNP outputs. Configurable via DIP switch and teach-in wheel. Scre...

Module Type = Temperature Converter Input Signal Type = RTD Output Signal Type = Current, Voltage Input Range = 0 → 4000 Ω, -200 → +850°C Supply Voltage = 9.6 → 30V dc Hazardous Area Certification ...