Circuit Breaker Accessories (23 items)

Accessory Type = Controller

Accessory Type = Controller

Accessory Type = Residual Current Module For Use With = AC Charging Controllers

Circuit Breaker Accessories

Accessory Type = Controller

Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 24 V DC

The Phoenix Contact holder is a profile console for 40 mm aluminium profile, it is a bracket for housing attachment diameter 30 mm. It is made of black glass-fibre reinforced polycarbonate PC and a...

The Phoenix Contact 75 mm wall bracket has four 6.5 mm mounting holes and mounting diameter of 30 mm for housing attachment, made of black glass-fibre reinforced polycarbonate PC and aluminium and ...

Phoenix Contact Thermomagnetic Circuit Breaker - M1. The DIN rail mounting, single pole, TMC 1 M1 range of thermomagnetic circuit breakers from Phoenix Contact have SFB tripping characteristics tha...

Base element for type 2 arresters of the VALVETRAB MS series of products, with remote indication contact. Version for 3-phase power supply with separate installation of N and PE conductors.

Base element for protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side, with bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7...

Wiring bridge for connecting three FLASHTRAB SEC HYBRID lightning arresters with an N/PE spark gap to a 3+1 circuit for TN-S-/TT systems. Connecting pitch of 17.5 mm, 1-phase, 8-pos., 35 mm² cross ...

RJ45 sleeve housing IP20, for pin insert VS-08-ST-RJ45, with push-pull interlocking for panel mounting frames, for cable cross section 5.0 mm ... 6.5 mm

POWER-SUBCON header, for mounting side, 5-pos., shielded, green, for wall thicknesses up to 2.0 or 4.5 mm, with spacer pin SW 5L5/4-40 UNC-M 3 x 8