Dc/Pos Pos Accs (90 items)

Lind 12-32V Material Handling Isolated Power Adapter for Getac The Lind 12-32 Volt power adapter provides regulated power to the docking stations and/or cradles for Getac F110, S400, T800 and V110 ...

The rugged design of the Lind power adapters makes them ideally suited for use in harsh mobile environments. The adapter electronics are protected by a rugged aluminum housing which is filled and s...

The rugged design of the Lind power adapters makes them ideally suited for use in harsh mobile environments. The adapter electronics are protected by a rugged aluminum housing which is filled and s...

SPARE KEY FOR 7160-1368-20 .

This power adapter harness has a 12-24V power input range, a 6 foot input cable with fuse assembly and bare wire end, and a 6 foot output cable with a male USB-C connector and 5V 3 amp output.

Compatibility Works on clean, smooth and flat non-porous surfaces. Simply mount your small device solution with confidence by using the small suction cup from Zirkona. This suction cup features a s...

Gamber-Johnson's new VESA 75mm Clevis Motion Attachment combines Gamber-Johnson’s proprietary 2x4 mounting-hole pattern with the international standard VESA 75mm pattern. - Tilt capabilities: - 90°...

ZIRKONA COMPUTER CRADLE LARGE

ZIRKONA COMPUTER CRADLE - SMALL

This Zebra L10 vehicle dock/cradle RF module can be attached to the L10 vehicle tablet cradle or the vehicle tablet dock to add antenna pass-through. The RF module has 5 RF pass-through connections.

Placement: Inserts into any lower tube or vehicle base with welded lower tube Height Adjustability: Yes - allows .38" - 2.76" adjustment above lip of lower tube Dimensions: 7.22" H x 4.31" W x 3.0"...

Placement: Inserts into lower tube or vehicle base with a welded lower tube Height Adjustability: Yes - allows .38" - 5.76" adjustment above lip of Lower Tube Dimensions: 10.22" H x 4.31" W x 3.0" ...

Placement: Pole clamp attaches to the lower tube, flattened surface on opposite end secures to vehicle floor, console or dash. Dimensions: 2.3" W x 10.3"-35.3" D Construction: Heavy gauge steel Fin...

Placement: Any upper pole, complete pole or low profile bracket Tilt: Yes - up to 90 degrees fore and 30 degrees aft Swivel: Yes - up to 60 degrees right and left on two different pivot points Slid...

Placement: Positioned between any motion attachment and any Gamber-Johnson docking station of cradle Dimensions: 0.85" H x 7.0" W x 6.5" D Weight 2.43 lbs Note: Computer and mount/dock combined wei...