Mounting Kits (1,115 items)

EU Req CONNECT **New Retail** 3 EN NTWK I/F CARD 40GIGE DUAL P (1.85 lbs)

7M Tilt Over. Uses TC400/4 Root - 325mm cabinet Base

The under desk cable holder is the ultimate solution to cluttered and tangled cables that can be frustrating and distracting. Made from high-quality materials, the under desk cable holder is durabl...

47-76mm Mount for installing and securing AV equipment on the wall behind a display or over ceilings. Can be use for all types of eqiupment and secures the e.g player tight and keeps it in place.

32-46mm Mount for installing and securing AV equipment on the wall behind a display or over ceilings. Can be use for all types of equipment and secures the e.g player tight and keeps it in place.

ViewSonic TV Mount holds your all-in-one conference camera above or below your ViewBoard or Presentation Display with the industry-standard VESA mounting points.Get the perfect fit for your meeting...

The EP-WHL-005 can be easily attached to the ViewSonic® ePoster Digital Kiosk (EP5520, EP5520T, EP5540, EP5540T, EP5542 and EP5542T) and provide easy mobility for moving the kiosk from location to ...

VSD242 AC Adapter 48W adapter 12V / 4A

Made of aluminium - Fully adjustable swivel head - Internal cable management - Load rating: 25kg (55lb) - The sealing rings OWBIP2 or OWBIP3 ensure an IP66 protection to the housing

Toolless Mounting Bracket for mounting 1 or 2 vertical power strips side-by-side

This mounting kit for 2-post racks used in telecom sites is covenient when center type mounting is required for 23'' wide tacks

This mounting kit for 2-post racks used in telecom sites is covenient when flush type mounting is required for 23'' wide tacks

This mounting kit for 2-post racks used in telecom sites is covenient when center type mounting is required for 19'' wide tacks

This mounting kit for 2-post racks used in telecom sites is covenient when fush type mounting is required for 19'' wide tacks

Telescoping rails that mount to the sides of the rack-mount UPS to facilitate installation into a rack-mount enclosure. This kit is for use with all GXT 2U, GXT 5kVA and associated battery cabinets...

This mounting kit for 2-post racks used in telecom sites includes a couple of brackets to fix the UPS to the 2-posts rack.

Rackmount Tray Assembly & fascia for 4x (VHW-HWPS-B8 or VCS-8P2)

HIGHWIRE DIN Mount Bracket for single HIGHWIRE / HIGHWIRE Powerstar unit

Rack-mounting bracket for eight HIGHWIRE units in 1U

Ventev's Two-Antenna Co-Locating Mount with Two 18" Strong Arm Mounts Kit for Cisco 3802e offers unprecedented flexibility to install an access point and two antennas together, and then position th...

Mount for Cisco 3802e

The TerraWave I-Beam Spring Mount is designed to mount antennas on I-Beams in high-traffic areas. The mount spring allows the antenna to flex if bumped to prevent damage. The mount is made of low c...

The TerraWave I-Beam Spring Mount is designed to exclusively mount the Cisco AIR-ANT2544V4M-R Omnidirectional antenna on I-Beams in high-traffic areas. The mount spring allows the antenna to flex i...

Ventev's Wi-Fi Right Angle Wall Bracket t is designed to provide optimal Wi-Fi coverage in high-ceiling structures. This enclosure can comfortably fit most indoor access points and provide maximum ...

Ventev’s TerraWave Co-Locating Mount is designed to simplify deployments and reduce cable loss by placing the access point and antenna inches apart. The mount consists of a baseplate that attaches ...

Ventev’s Single-Axis Co-Locating Mount with I-Beam Clamp for Cisco 3802e access point (AP) and TerraWave antennas is an elegant solution designed to simplify deployments, improve network performanc...

Two-Antenna Mounting Brkt

10in Strong Arm Mount

TerraWave's Above Ceiling Tile Mounting bracket is designed to securely mount equipment, such as WLAN access points (APs), up above a ceiling tile grid. Includes 10" long bolts to conveniently and ...

TerraWave's Above Ceiling Tile Mounting bracket is designed to securely mount equipment, such as WLAN access points and antennas, up above a ceiling tile grid.

The UVC G3 Flex Professional Wall Mount is a flexible outdoor mounting option for the UVC G3 Flex Camera. It's IPX4-rated for splash resistance and supports upside-down mounting. The camera image o...

Corrosion-resistant pole mount that supports up to four Wave AP Micros for full 360° broadcasting.

Versatile mounting system for UAP-AC-PRO, UAP-AC-HD, UAP-AC-SHD, and above.

Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design.

The 24V, 0.5A models, POE-24-12W and POE-24-12W-G, are wall-mountable using the optional wall-mount brackets.

Precision Alignment Kit for 620 mm Dish Reflector The Precision Alignment Kit enables extremely accurate aiming to optimize airFiber and airMAX Point-to-Point (PtP) links. Plug and Play Compatibili...

Window/Wall Mounting kit for NanoStation.

TRENDnet’s Pole Mount Bracket, model TV-HP400, installs a TRENDnet SpeedDome series network camera on a pole with a diameter of up to 12.7 cm (5 in.). This rugged powder-coated aluminum mount holds...

TRENDnet TI-R4U - Rack mounting chassis - 4U - 19" - for TRENDnet TI-RSP100048

Mount an 11” wide switch to a 19” networking equipment rack - Includes 2 metal angles and switch mounting screws. - Compatible with TRENDnet’s TEG-S16Dg and TEG-S24Dg. The Rack Mount Kit, model ETH...

TerraWave’s High Strength Universal Articulating Mount offers a rugged installation solution for pole or wall mounted antennas and other WLAN accessories that may be installed in challenging enviro...

Ventev's TerraWave Industrial Articulating Mount for TerraWave Wi-Fi Antennas offers a rugged installation solution for larger, heavier pole or wall mounted antennas. The mount and mounting hardwar...

Ventev’s I-Beam Low Profile Industrial WiFi Mounting Solution is designed to allow mounting of a WiFi/wireless access point, bubble enclosure and an antenna to an I-Beam. This industrial mount can ...

PR5MEC25 TSW2 REAR PANEL WITH DIN RAIL HOLDER

PR5MEC11 COMPACT DIN RAIL KIT

PR5MEC00 DIN RAIL KIT

Overview Ideal for shrinking desktops and tight spaces, the Docking Station VESA Mount frees your desk from additional clutter. Easily attach the bracket to your VESA-compatible monitor or Ergo arm...

Sliding rack rails for Synology rackmount servers Synology Rail Kit RKS-03 enables easy maintenance access for Synology rackmount models. RKS-03 is backed by Synology’s 1-year limited warranty. Com...

From small-and-medium business to individual users, Synology products offer a full range of choices to fulfill different needs, while sharing some similar characteristics- eco-friendly, quiet, and ...

UbiCast Premium Maintenance Contract - Extended service agreement - for UbiCast MediaServer - preventive maintenance - 1 year - 1 incident

UbiCast MediaServer Cloud - Subscription licence (1 year) - additional 100 GB capacity

UbiCast MediaServer MediaCache - Subscription licence (1 year) - 1 server

UbiCast MediaServer MediaCache - Subscription licence (1 year) - 200 Mbps bandwidth, up to 200 simultaneous viewers

UbiCast MediaServer MediaCache - Subscription licence (1 year) - 100 Mbps bandwidth, up to 100 simultaneous viewers

UbiCast MediaCache - Server - rack-mountable - 1U - 1 x Xeon E3-1220 / 3.1 GHz - RAM 4 GB - SSD 2 x 200 GB - monitor: none

Easy SSD Connection Looking to add 2.5" SSDs (solid state drives) to your storage pool? The problem is that if you want to install them in your desktop computer or multi-drive storage system, you c...

A Little Extra Storage Whether you use Fusion storage systems to perform incremental backups or swap out large amounts of data, its always handy to have extra drives around—simplify the swapping by...

Designed for Fusion rackmount servers. - Includes necessary hardware (rail and screws) to mount storage systems into server racks. Fusion Rack Slide Set Sonnet's Fusion Rack Slide Set allows you to...

Wraparound Security – Without Barriers to Operation Unlike brackets and shelves that merely hold a Mac Studio in place — or others that provide minimal protection — MacCuff Studio is pry-resistant ...

Versatile and Secure Mounting for Mac mini Move your Mac mini off the desktop! Sonnet’s MacCuff™ mini 2 security mounting bracket frees up space by attaching your computer to the back of a display—...

Extra fast and accurate mounting of video rows. Using one long mounting rail rather than several small ones allows you to mount SMS Multi Display Wall modules faster, and perfectly aligned. The lon...

The Link SMS Flatscreen H2 Unislide is the essential link between your heavy screen and your bracket. The universal slide fits most screens up to 50 kg. SMS Flatscreen H2 Unislide is easy to mount ...

Where should the camera be placed at a conference? We have shelves designed for camera or codec units for your SMS Flatscreen H product. Adaptable and simple shelves that can be smoothly and contin...

Stable course towards lessons and presentations. With this accessory you can roll your presentation equipment easily and safely from one room to another, without having to pull the interactive boar...

A three-way hook - just the thing for keeping cables together and tidy. The cables are rolled up and held together with the Velcro tape supplied with the unit. In this way everything is in its prop...

A silver-finish 19” computer rack for computer and AV equipment. Available as an accessory for SMS X Media Box.

A delightful union of display and camera – mounted on a bracket or the wall. A thin and elegant shelf that gives the impression that the video camera is directly attached to the display. In additio...

Camera shelf for our new X Video Conference brackets.

A masterpiece. Get even more out of the SMS Multi Control by way of a mounting device with the help of which you can install another screen above the centre screen of your single-row module. Fits a...

Need an extra hand? The Clamp is constructed for special needs. It allows easy and quick mounting of your screen. Perfect for when you need to display your screen in places where it would otherwise...

Horizontal shelves that are perfect for receiver, DVD etc. The shelves are made out of solid mdf board and are available in Plexiglas, grey, black, birch or beech. This is a perfect complement to y...

Connecting your screen to your bracket. The SMS Flatscreen L Slide is the missing link between your bracket and lighter screen. It is suitable for most screens up to 15 kg and is a smart constructi...

Ergonomic & Mobile Interaction An ergonomic and flexible stand that is easy to move and easy to install. This solution, with its stable design, is perfect for large interactive boards and a rotatab...

Universal wall bracket with fixed tilt Simple and fast to mount. It can be locked with a locking pin (included) or padlock (not included) for improved personal safety and security against theft. Ca...

Func Side Shelf, White

Func Side Shelf Black

When your presentation lies on several levels. Func Mobile Shelf is an excellent place for accessories for your large display. It fits both Func Mobile and Func Mobile Motorized as well as Func Wal...

When your presentation lies on several levels. Func Mobile Shelf is an excellent place for accessories for your large display. It fits both Func Mobile and Func Mobile Motorized as well as Func Wal...

Different points of view. The SMS Icon WL ST is a small and smart wall bracket that adds a lot of possibilities to your display. It can make your display swivel and tilt in almost any direction. It...

Casing Specific OMN-D Ceiling Extension Kit 500mm

CYB-DP - mounting plate Thorsman 1xVGA - 1xtelephone Ø3,5 3-pole

Extension frame Wall mounting CYB-RF White For BK3 and BK4

Door Foam Assembly

Pi PoE HAT for Pi 3 Model B+

1U 19" rack mount bracket for P2-UMT242, P2-UMT442, P2-UMT832, Dominion KX, Dominion KX2 and Dominion SX16 and SX32

RCS8 19" Rack Mount Brackets for CS8 (1U)

19" Rack Mount Brackets for CS2/CS4 (1U) With space at a premium in the data center, Raritan provides rack mount brackets for each of its products to accommodate your needs.

Raritan - Rack bracket kit - 1U

Rackmount brackets to mount KX III User Station in standard 1U 19" data center rack

The RM-WG-T8 gives you the ability to mount your WatchGuard desktop appliances in a 19" rack. The rack is tailored specifically for the listed models to guarantee a perfect fit. In addition, the co...

The RM-UB-T6 gives you the ability to mount your Ubiquiti desktop appliances in a 19" rack. The rack is tailored specifically for the listed models to guarantee a perfect fit. In addition, the conn...

The RM-UB-T5 gives you the ability to mount your Ubiquiti desktop appliances in a 19" rack. The rack is tailored specifically for the listed models to guarantee a perfect fit. In addition, the conn...