Mounting Kits (3,607 items)

Star - Money case partition plate

A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With an angled, thin end. Made in black ABS plastic.

A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With a thin end. Made in black ABS plastic.

SPA128 Replacement Screws for

Rubberfriction pad, short -Black-

Plastic Anti-Wobble sleeve, SP1 long and black, MOQ 25

Felt Ø10mm x 1.5mm thick, Black EVA (T=1.5, shore 25)

Anti-wobble plastic sleeve SP2 -BLACK- MOQ 25

Cabled Reader Wall Bracket For CR950/CR1XXX Wall Mount Bracket (Light Gray)

Plastic Anti-Wobble sleeve, SP1 long and black

Mounting Accessorie

Bracket for 2+2.9+4.4" EE klæbende

Bracket for 2+2.9+4.4" EE skrue

Bracket for 2+2.9" EE klæbende

Screw set for base/top. Consists of 4 screws + lock washers.

Screw set for extension parts. Consists for 2 screws + nuts and 1 Allen key. Stainless steel.

Replacement Screws for X-Frame

Screw set for mounting holder or MultiMoveClip. 4 screws + nuts and 1 torx key included.

Ribbon spindle assembly

Replacement screws for C-Frame

The RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The RAP-S-KNOB3U offers the ideal amoun...

Fuse 2 A, with holder. Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Car Kit.

A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With thin ends, one pointy and one level end. Manufacutred in black ABS plastic.

Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip.

Plate with predrilled AMPS holes. 7x42x50 mm. Used for positioning the installed equipment further away from the dashboard. Dimensions: 7x42x50 mm.

Star - PE detector assembly

Plastic Stand for ACR122U / ACR1251U /ACR1252U

Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display.

The coupler is to combine 2 RAP-B-200-1U and/or RAP-200-1U to form a double socket arm with the capability to rotate 360 in the center of the arm. This will also give the ability to have a B size 1...

RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environme...

The RAP-319U is a composite adapter that is designed to narrow the rail width of RAM u-bolts to a minimum of 0.5".

Fixing for X-Frames

SC 4-40 X .31 PN PH SS

Used in conjunction with the appropriate centre module, this cover and bracket allows for the installation of the Datalogic GFS4470 scanner

Star - Under counter mounting bracket

1dBi Stub Antenna - RP-SMA Right-Hand Thread

The Center Loader allows for the connection of two Extruded Aluminum Tough-Track systems in a straight line and provides a loading point to insert track bases. Hardware not included.

Device mounting Female adapter, AMPS-standard holes. To 215053. The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in t...

Device mounting adapter, Male piece. AMPS-standard holes. Use with item 215053, 215054 or 215055. Device mounting adapter, male piece. Is to be used with item 215053, 215054 or 215055. With this ex...

Female cigg-plug with open ends for fixed installation. Cigarette lighter socket with open ends for fixed installation. Is to be used when you want to use an active holder with cigarette lighter pl...

The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws and adhesive tape on the back. With predrilled ...

Mounting plate Extension plate, 149x69x5 mm. The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws an...

Extension plate, 155x50x5mm. With predrilled AMPS holes. The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder...

Vertical Mounting plate (155x50x5mm). The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder. With predrilled h...

Vertical Mounting plate (155x50x5mm). The extension plate makes it possible to attach two devices with tilt swivel onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder. ...

Mounting plate (80x50x5mm). AMPS-standard. The choise when you want to install your device positioned a bit to the left or right than the center of the ProClip. Predrilled holes, AMPS standard. Mad...

The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws, Size: 100x50x5mm

MultiClip adapter for SpacePole Stack - BLACK

The High Strength Plastic Universal Plate has a 1.0" diameter Round Male Button on an Octagon Neck connected at right angles to a 1 1/4" x 2 1/2" Diamond Plate. The plate has two holes 1.912" from ...

The RAP-300-1RU consists of a round 18mm diameter x 1mm thick metal plate with adhesive back.

The RAM-to-Garmin double ball adapter arm will attach to the EZ-Strap base , making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates th...

Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon...

Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon...

RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environme...

Spare part - Felt pads U-Frame - Black

The RAP-S-KEY3-4U replacement key knob is compatible with the RAP-S-KNOB3-4, RAP-S-KNOB3-4U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 4 node security pattern. P...

The RAP-S-KEY3-5U replacement key knob is compatible with the RAP-S-KNOB3-5, RAP-S-KNOB3-5U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 5 node security pattern. P...

The RAP-S-KEY3-6U replacement key knob is compatible with the RAP-S-KNOB3-6, RAP-S-KNOB3-6U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 6 node security pattern. P...

The RAP-S-KEY3-7U replacement key knob is compatible with the RAP-S-KNOB3-7, RAP-S-KNOB3-7U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 7 node security pattern. P...

The RAP-S-KEYN5-4U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the Pin-Lock security nut. Verify the correct replacement key knob by matching ...

Double sided tape adhesive tape

Lock for SS-102

The High Strength Plastic Universal Plate has a 1.0"diameter Round Male Button on an Octagon Neck, connected at right angles to a 2.5" diameter Round Plate. The plate has four holes that match the ...

The RAP-SB-238FU consists of 2.43" x 1.31" composite diamond base with female socket. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will c...

The RAP-SB-238U, composite diamond base, contains a 0.75" high strength composite ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to c...

The RAP-SBA-RRLU consists of a 3" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU .

The RAP-SBA-RRU consists of a 1.43" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU .

Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon...

The RAP-PPA-FRM75 consists of 2 female slip pipe socket for 3/4" to 1/2" reducer. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement...

The RAP-PPA-MRM75 consists of a male to male slip pipe socket coupler. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement. Intended ...

The RAP-274-1BU converts all 1" diamond base ball mounts into a quick release mount. Attach the RAP-274-1BU to the diamond pattern found on all 1" diamond base ball mounts, then transfer your cradl...

The RAM-to-Garmin double ball LONG arm will attach to the EZ-Strap base , making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the G...

Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon...

Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon...

Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon...

The RAM-VP-CAP1 is a protective cap that covers lower RAM Tele-Pole in your vehicle when it is not supporting your upper pole & swing arm assembly. If you ever need to temporarily remove your lapto...

RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environme...

SPA130 Replacement Anchors for

The RAP-S-KEY5-4U replacement key knob is compatible with the RAP-S-KNOB5-4, RAP-S-KNOB5-4U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 4 node security pattern. P...

The RAP-S-KEY5-5U replacement key knob is compatible with the RAP-S-KNOB5-5, RAP-S-KNOB5-5U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 5 node security pattern. P...

The RAP-S-KEY5-6U replacement key knob is compatible with the RAP-S-KNOB5-6, RAP-S-KNOB5-6U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 6 node security pattern. P...

The RAP-S-KEY5-7U replacement key knob is compatible with the RAP-S-KNOB5-7, RAP-S-KNOB5-7U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 7 node security pattern. P...

The RAP-S-KEYN5-5U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the Pin-Lock security nut. Verify the correct replacement key knob by matching ...

The RAP-S-KEYN5-6U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the Pin-Lock security nut. Verify the correct replacement key knob by matching ...

The RAP-S-KEYN5-7U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the Pin-Lock security nut. Verify the correct replacement key knob by matching ...

Magellan™ 1100i Omnidirectional Bar Code Reader Magellan 1100i readers are available in Black or Grey and offer optional features that include a button for targeted scanning mode and 2D decoding. A...

Zebra - Barcode scanner mounting bracket - desk mountable - white - for Zebra DS9208 Omnidirectional Hands-Free Presentation Imager